GD25Q128 Flash Memory 128Mbit 16MB SOIC-8 pin 3.3V

Description

GD25Q128 Flash Memory 128Mbit 16MB SOIC-8 pin 3.3V

The GD25Q128 is a high-performance, low-power SPI (Serial Peripheral Interface) NOR Flash memory device manufactured by GigaDevice. Below are the key specifications:

Key Specifications:

1. Memory Capacity:
   • 128 Mbit (16 MB)
2. Interface:
   • SPI (Serial Peripheral Interface)
   • Supports Standard, Dual, and Quad SPI modes.
3. Operating Voltage:
   • Wide voltage range: 2.7V to 3.6V
4. Performance:
   • Read Speed: Up to 104 MHz for single, dual, and quad SPI
   • Page Program Time: 0.4 ms (typical)
   • Erase Time:
     • Sector Erase (4 KB): 60 ms (typical)
     • Block Erase (32 KB/64 KB): 0.3/0.6 seconds (typical)
     • Chip Erase: 3 seconds (typical)
5. Memory Organization:
   • Sector size: 4 KB
   • Block size: 32 KB and 64 KB
   • Page size: 256 bytes
6. Endurance and Retention:
   • Endurance: 100,000 Program/Erase Cycles
   • Data Retention: 20 years
7. Package Options:
   • SOP-8 (150 mil or 208 mil)
   • WSON-8 (6×5 mm)
   • USON-8
   • QFN-8
8. Temperature Range:
   • Operating Temperature: -40°C to +85°C (Industrial grade)
9. Additional Features:
   • Software/Hardware Write Protection: Protects critical memory sections.
   • Suspend/Resume Commands: Available for program and erase operations.
   • Low Power Consumption: Deep Power-Down mode available.
   • JEDEC Standard Commands: Fully compliant with JEDEC standards for compatibility.

Applications:

• Embedded systems
• IoT devices
• Consumer electronics
• Industrial automation
• Boot ROM for microcontrollers or FPGAs

For detailed electrical characteristics and timing diagrams, refer to the GD25Q128 datasheet.