5032 SMD quartz 4pin crystal oscillator 24MHZ

Description

5032 SMD Quartz Crystal / Oscillator – 24 MHz (4-pin)

Package & General

• Package Size: 5.0 mm × 3.2 mm × ~0.7–1.2 mm (5032 SMD)

• Pins: 4 pads – typically two for the crystal electrodes and two for mounting/ground reference (exact padout depends on manufacturer).

• Mounting: Reflow solderable SMD.

Electrical Characteristics (Crystal Resonator Type)

For a passive quartz crystal (not an active oscillator IC) in the 5032 package – used with an external oscillator circuit (e.g., MCU XTAL pins)

• Nominal Frequency: 24.000 MHz (AT-cut fundamental mode)

• Frequency Tolerance @ 25 °C: typically ±10 ppm to ±30 ppm (depends on grade)

• Load Capacitance (CL): commonly 8 pF, 12 pF, 18 pF, 20 pF — must match oscillator circuit requirements

• Frequency Stability vs Temperature: ±10 ppm to ±30 ppm (varies with temperature range and spec)

• Operating Temperature Range: typically -40 °C to +85 °C (industrial) but sometimes narrower variants like -20 to +70 °C exist

• Storage Temperature: -55 °C to +125 °C

• Equivalent Series Resistance (ESR): ~30 Ω to 40 Ω max at 24 MHz (typical for 20-50 MHz crystals)

• Shunt Capacitance (C0): typically ~5 pF

• Drive Level: ~10 μW to 300 μW

• Insulation Resistance: ≥ 500 MΩ @ DC 100 V

• Aging: ~±3 ppm/year max.

Note: This is the passive quartz resonator itself, not a complete oscillator with an output driver. For MCU use the crystal is paired with load capacitors and the MCU’s built-in oscillator circuit.