Arduino Human Eye Response Non-Contact Gesture Detection and Attitude sensor APDS-9930 CJMCU-9930 Proximity

Description

Proximity and non-contact gesture detection and attitude sensor APDS-9930

The APDS-9930 provides digital ambient light sensing, IR LED and a complete proximity detection system in a single 8 pin package.

The proximity function offers plug and play detection to 100 mm thus eliminating the need for factory calibration of the end equipment or sub-assembly.

The proximity detection feature operates well from bright sunlight to dark rooms.
The wide dynamic range also allows for operation in short distance detection behind dark glass such as a cell phone.
In addition, an internal state machine provides the ability to put the device into a low power mode in between ALS and proximity measurements providing very low average power consumption.

The ALS provides a photopic response to light intensity in very low light condition or behind a dark faceplate.

The proximity function is targeted specifically towards near field proximity applications. In cell phones, the proximity detection can detect when the user positions the phone close to their ear. The device is fast enough to provide proximity information at a high repetition rate needed when answering a phone call. This provides both improved “green” power saving capability and the added security to lock the computer when the user is not present.
The addition of the micro-optics lenses within the module, provide highly efficient transmission and reception of infrared energy which lowers overall power dissipation.

Features

– ALS, IR LED and Proximity Detector in an Optical Module
– Ambient Light Sensing (ALS)
– Approximates Human Eye Response
– Programmable Interrupt Function with Upper and Lower Threshold
– Up to 16-Bit Resolution
– High Sensitivity Operates Behind Darkened Glass
– Low Lux Performance at 0.01 lux Proximity Detection
– Fully Calibrated to 100 mm Detection
– Integrated IR LED and Synchronous LED Driver
– Wait State Power – 90 µA Typical
– Programmable from 2.7 ms to > 8 sec
– Up to 400 kHz (I2C Fast-Mode)
– Dedicated Interrupt Pin