Arduino Pro Mini 328-5V
It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini 328! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software). The Arduino Pro Mini doesn't come with connectors populated so you can solder in any connector or wire with any orientation you need. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.
We recommend first time Arduino users start with the Uno. It's a great board that will get you up and running quickly.
To minimize the cost of an Arduino, the Arduino Pro Mini is like the Arduino Mini (same pin out) but to keep the cost low, uses all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board for programming and supports auto-reset.
Features of the Arduino Pro Mini 328 - 5V/16MHz:
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- USB connection off board
- Supports auto-reset
- 5V regulator
- Max 150mA output
- Over current protected
- Reverse polarity protected
- DC input 5V up to 12V
- On board Power and Status LEDs
Dimensions of the Arduino Pro Mini 328 - 5V/16MHz:
- 0.7x1.3" (18x33mm)
- Less than 2 grams
Documents for the Arduino Pro Mini 328 - 5V/16MHz: