Arduino Uno DIY Best price in Egypt

15 - 30 Days Arduino Uno DIY

Description: This kit contains everything you need to build your very own Uno-compatible development board! Simply follow the Assembly Guide and after some basic soldering, you’ll have made a fully-functional Arduino-compatible development board .

After the board is assembled, it can be powered by an USB to UART module or a regulated 6-15VDC power supply connected to either the DC Barrel jack or the new JST footprint.

Note: You will need either an FTDI Basic or any compatble USB to UART module to load code using the Arduino IDE. Buy from Here

Kit Includes:

  • 1 x Arduino-Compatible PTH Kit PCB
  • 1 x MCP1700 3.3V Voltage Regulator
  • 1 x 5mm Green LED
  • 1 x 5mm Red LED
  • 2 x 330Ohm Resistor
  • 2 x 10kOhm Resistor
  • 1 x 16MHz Crystal
  • 2 x 22pF Ceramic Capacitors
  • 5 x 0.1uF Ceramic Capacitors
  • 2 x 10uF Electrolytic Capacitors
  • 1 x LM7805 5V Regulator
  • 1 x Diode 1N4001
  • 1 x Resettable Fuse PTC
  • 1 x 28-Pin DIP Socket (To seat your ATMega)
  • 1 x Push Button Reset Switch
  • 2 x 6-Pin Female Headers
  • 2 x 8-Pin Female Headers
  • 1 x 6-Pin Right Angle Header (To connect your FTDI Basic)
  • 1 x 0.1uF Capacitor
  • 1 x DC Barrel Jack


Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 2053
  • Product Code: ard-uno-diy
  • SKU Code: F1-1
  • Availability: 15 - 30 Days
4 Product(s) Sold
  • 85.00LE

Tags: Arduino Uno DIY, ard-uno-diy, Arduino Boards