DHT11 Temp/Humidity Sensor Module

15 - 30 Days DHT11 Temp/Humidity Sensor Module

DESCRIPTION

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

TECHNICAL DETAILS

  • Low cost
  • 3 to 5V power and I/O
  • 2.5mA max current use during conversion (while requesting data)
  • Good for 20-80% humidity readings with 5% accuracy
  • Good for 0-50°C temperature readings ±2°C accuracy
  • No more than 1 Hz sampling rate (once every second)
  • Body size 15.5mm x 12mm x 5.5mm
  • 4 pins with 0.1" spacing

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 1552
  • Product Code: MOD-DHT11
  • SKU Code: F5-1
  • Availability: 15 - 30 Days
45 Product(s) Sold
  • 45.00LE

Tags: DHT11 Temp/Humidity Sensor Module, MOD-DHT11, Modules & Accessory Boards