Battery Level Alarm buzzer Voltage Display for Lithium Battery 1S~8S

Battery Level Alarm buzzer Voltage Display for Lithium Battery 1S~8S 

Product introduction

 This voltage display is used for 1S~8S lithium battery detection. It automatically detects the voltage and total voltage of each battery cell of the lithium battery.

    It supports reverse connection protection. It allows you to understand the working status of your battery anytime, anywhere. So that the battery will not be injured by over-discharging or over-charging.

 Whether it is in flight or in idle state, you can plug the electric display into the battery balance charging connector to understand the battery power status.

 No multimeter is necessary!

 When the voltage is lower than the set value, the buzzer will sound and the red LED will flash; the set value is 3.3V, press the button to change the voltage set value, and automatically save the user's current set value.

Product parameters

 1. Used for 1S-8S lithium battery detection

2. Voltage detection accuracy: ± 0.01V.

3. Group voltage display range: 0.5V~4.5V

4. Total voltage display range: 0.5V~36V

5.1S test mode voltage range: 3.7V~30V

6. Low voltage buzzer alarm mode 2S-8S

7. Alarm Voltage setting range: OFF~2.7~3.8V

8. Size: 40mm x 25mm x 11mm Weight: 9g

Instructions

     Insert the electric display face up (the side of the digital display), insert it towards you, and insert the white balance charging plug of the battery along the leftmost pin of the electric display. If there is no response, just plug the balance charging plug back. There is a small button at the other end of the electric display, which is used to set the alarm voltage of the electric display.