CNC Interface Card With TB6560 3-axis Motors Driver 3A (3.5A Peak) Best price in Egypt

SOLD OUT CNC Interface Card With TB6560 3-axis Motors Driver 3A (3.5A Peak)

This stepper motor driver can drive up to 3 stepper motors with 3.5 A peak current for each motor. It is also equipped with spindle relay output and can handle a spindle. It has micro-stepping capability up to 1/16 micro-step.

The driver is integrated with break output board (so you do not need one) and can be connected directly to the parallel  port. In addition it has a manual control port interface for manual control of your motors.  

The 3 axis driver uses Toshiba TB6560AHQ chip and equiped with optical isolation with dc-dc power supply isolation for full protection. Finally, this driver is compatible with most parallel software MACH3, KCAM4 etc!

Features:

  • Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset !
  • Number of motors :                       3 motors
  • Maximum current per motor:         3.5 A
  • Voltage range:                               12: 36 V
  • Support four microstepping 1、1/2、1/8、1/16; for higher accuracy and smooth operation
  • Overload, over-current and over-temperature safety 
  • Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)
  • Bipolar constant current chopper drive with non-resonant region 

Voltage Selection:

12-16V DC power supply for Nema 17 stepper motors
16-24V DC power supply for Nema 23 stepper motors
24-36V DC power supply for Nema 34 stepper motors

Current Calculation:
Output current of the power supply can be calculated as:
Output current = Rated current of your stepper motors * Number of Motors + 2A
(For example, if you want to drive 3 * 3A Nema 23 stepper motors, theoretically 24V 15A DC power supply is recommended).

 

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 3192
  • Product Code: cnc-tb6560
  • SKU Code: E-1
  • Availability: SOLD OUT
4 Product(s) Sold
  • 875.00LE

Tags: CNC Interface Card With TB6560 3-axis Motors Driver 3A (3.5A Peak), cnc-tb6560, CNC Mechanics & Electronics