No products in the cart.
CNC Interface Card With TB6600 4-axis Motors Driver 4.5A (5A Peak)
Out of stock
EGP 1,500.000 exc. vat
Out of stock
Brand:Chinese
Description
Main Features:
1: The inductive DC-DC step-down module, then using computer terminal power supply isolation module design,
just to run a power input, the input voltage 24V-40V input voltage allows high, completely beyond TB6560. ,
TB6560 input voltage is typically 24V.
2: Increase the external signal input optocoupler used in all optical coupling isolation input,
3: Increase the analog 0-10V output, combined with the drive spindle control software MACH3 governor.
4: add a select group of relay output (can output two relay respectively control two different devices,
load isolation relay 1 pin P16, P17 pin relay 2)
5: Increase 20 pin multi-interface, a variety of signal input control docking (input signal directly to the handle
or Weihong card), you can use single-chip, ARM, DSP control.
6: Add signal buffer chip, an external signal amplification, increasing the accuracy of pulse.
7: E oversized bottom aluminum fins guarantee full load for 24 hours, the temperature is very low
(which can add a fan or other cooling device).
The drives are available software mach2, mach3, (mach3 have support WIN7 system), KCAM4 like.
Stepper motor drive with TB6600 new original chip
rated maximum output: ± 4.5A, 40V, peak 5A, low output impedance, the source 0.5Ω,
the receiving end 0.4Ω, low voltage shutdown, thermal parking and circulation circuit protection.
After I design, you can set the output current to 0.5A 1A 1.8A 2.5A 3.3A 4A 4.5A to accommodate
More Different Motor Currents.
All semi-axis circuit design flow, reduce heat drives also reduce motor heat, the drive motor and the longest life.
TB6600 There are large subdivision and decay mode can be set, smooth running and low noise.
Additional information
| Weight | 0.038 kg |
|---|
Brand
Chinese
Chinese
Chinese
You must be logged in to post a review.
Resistor 0.5W
EGP 0.010 exc. vat Read more
3D Printer Egypt CNC Lead Screw Nut 8mm
EGP 75.000 exc. vat Add to cart
Smd Chip Capacitor size 0402 470pF
EGP 0.550 exc. vat Add to cart
SKiiP 36NAB126V1 Semikron IGBT Module 70A 1200V
EGP 3,950.000 exc. vat Add to cart
MMBZ15VDLT1G Dual Common Cathode TVS Zener Diode SOT23-3
EGP 10.000 exc. vat Add to cart
Pivot Joint for 2020 Aluminum Profile Extrusion
EGP 32.500 exc. vat Read more
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Product Enquiry
Related products
3D printer CNC SCS12UU Linear Motion Ball Bearing Slide Block
EGP 195.000 exc. vat Add to cart
END Support Pillow Block Bearing 10mm KFL000
EGP 50.000 exc. vat Read more
3D Printer Egypt Bearing Linear Rail Shaft Support Bracket SK8
EGP 45.000 exc. vat Add to cart
3D printer CNC SCS10UU Linear Motion Ball Bearing Slide Block
EGP 190.000 exc. vat Add to cart
Reviews
There are no reviews yet.