DC 12V 30MA 1 Channel Voltage Comparator Module Based on LM393N Chip
DC 12V 30MA 1 Channel Voltage Comparator Module LM393N LM339 IC Chip
Function:
1. Enter a voltage and the reference voltage contrast on the module (The reference voltage can be set by an adjustable electrical overcast), When the input voltage is greater than the reference voltage, Relay closed. When the input voltage is less than the reference voltage, Relay does not operate
2. Respectively inputted two special Compare Voltage signal 10 and 12, When the voltage signal 12 is greater than voltage signal 10, Relay closed. When the voltage signal 12 is less than voltage signal 10, Relay does not operate
3. Enter a voltage and the reference voltage contrast on the module (The reference voltage can be set by an adjustable electrical overcast),When the input voltage is less than the reference voltage, Relay closed. When the input voltage is greater than the reference voltage, Relay does not operate (opposite with function 1)
The reference voltage: The reference voltage of the module is the input voltage obtained through precision resistor divider, It determines the range of input voltage reference voltage, For example, the input voltage is 12V, then the reference voltage can be set in the range of 0-12V.
Product features
|
Product description
Module Name: 1-way Voltage Comparator Module.
Operating voltage: DC 12V
Typical operating current (relay pull state): DC12V 25mA;
Standby current (relay closed): about 5uA;
Function description (three functions):
Function 1:
Input a voltage and set the reference voltage on the module (the reference voltage can be set through the adjustable potentiometer) contrast;
When the input voltage is greater than the reference voltage, the relay is closed, the circuit connected;
When the input voltage is less than the reference voltage, the relay is disconnected and the circuit is disconnected.
Function 2:
Respectively inputting two voltage signals A and B to be compared;
When the voltage signal A is greater than the voltage signal B, the relay is closed and the circuit is switched on;
When the voltage signal A is smaller than the voltage signal B, the relay is opened and the circuit is disconnected.
Note: Function 2 requires that the jumper cap of the corresponding channel be unplugged.
Function 3:
Contrary to function 1, disconnect the jumper cap shown in the diagram and short-circuit the back contact in the diagram.
Input a voltage and set the reference voltage on the module (the reference voltage can be set through the adjustable potentiometer) contrast;
When the input voltage is less than the reference voltage, the relay is closed, the circuit connected;
When the input voltage is greater than the reference voltage, the relay is disconnected and the circuit is disconnected.
Reference voltage:
The reference voltage of the module is the input voltage after multi-turn precision potentiometer partial pressure obtained, the input voltage value determines the range of reference voltage value.
For example, the input voltage is 12V, then the reference voltage adjustable range is 0-12V.
- Availability: 10
- Model: DT-110
- Weight: 0.00kg