ER11 48V 400W CNC Spindle KIT Best price in Egypt

15 - 30 Days ER11 48V 400W CNC Spindle KIT

Spindle motor: a new brush DC motors

Operating voltage: 12-48VDC (DC)

Power: 400W

Speed: 3000-12000r / min (12V-3000 switch, 24V-6000 switch, 36V-9000 switch, 48V-12000 rpm)

Torque: 500mN.m

Insulation resistance:> 2 megohms

Dielectric strength: 400V

Diameter: 52mm

Chuck portion length: Arbor parts 35mm, (including the nut and sandwich 43mm)

Part chuck diameter: 16mm

Motor Overall Length: 185mm (comprising gripping parts and motor)

Spindle Weight: 0.9KG

Spindle runout about 0.01-0.04.

It can be used for engraving metal or non-metal and other materials.

The spindle comes with forced air cooling, can work long hours.

 

Wide voltage PWM DC brush motor speed:

[Applicable to permanent magnet brush DC low voltage DC12-60V machine]

A) Operating voltage: wide voltage (DC) DC12V-DC60V (limit 65V)

B) Control:

1, the default control potentiometer (5K-100K feasible) Default 10K;

2, analog 0-5V control, (unplug the plug XH2.54-3P potentiometer, the signal line connected XH2.54-3P midfoot, ground wire XH2.54-3P rightmost feet).

3, MACH3 interface terminal supports external PWM signal input speed control, external PWM input requirements: level 3.5-12V VPP, frequency 1K-10KHZ, suitable for MACH3 spindle speed control, (note the external PWM signal to control the need to unplug XH2 .54-3P plug potentiometer control to take effect, whether the person can not control).

C) Rated current: 10A, overload and short circuit protection current 12A. (Overcurrent cut output, overcurrent indicator flashes, the potential return light is off, overcurrent lift).

Iv) soft start function to prevent the motor starting current moment caused by excessive damage to the motor with power, (default 0 seconds soft start), 0-5 seconds adjustable.

E) controlling power: 12V120W, 24V240W, 36V360W, 48V480W, 60V600W

F) Dimensions: Length 75mm * wide 75mm * height 42mm (height including pillars, pillars height 6mm)

Vii) pulse width modulation range: 0% -100%

 

Viii) The governor in all humane terminals, user-friendly and flexible wiring.

400W cooled spindle motor for power

Input voltage: AC110 / 220V 50 / 60HZ, switchable for worldwide use

Output voltage: DC48V

Output Power: 400W power with temperature control cooling fan

Power Weight: 0.9KG

Power dimensions: length 215 * W 115 * H 50

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 3345
  • Product Code: SPINDLE K01
  • SKU Code: F5-Roof
  • Availability: 15 - 30 Days
11 Product(s) Sold
  • 1,700.00LE

Tags: ER11 48V 400W CNC Spindle KIT, SPINDLE K01, CNC Mechanics & Electronics