ESP32 CAM Development Board includes the Camera
Introduction
ESP32-CAM is
a low-cost ESP32-based development board with onboard camera, small in size. It
is an ideal solution for IoT application, prototypes constructions and DIY
projects.
The board
integrates WIFI, traditional Bluetooth and low power BLE, with 2
high-performance 32-bit LX6 CPUs. It adopts 7-stage pipeline architecture,
on-chip sensor, Hall sensor, temperature sensor and so on, and its main
frequency adjustment ranges from 80MHz to 240MHz.
Fully
compliant with WIFI 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used
as a master mode to build an independent network controller, or as a slave to
other host MCUs to add networking capabilities to existing devices
ESP32-CAM
can be widely used in various IoT applications. It is suitable for home smart
devices, industrial wireless control, wireless monitoring, QR wireless
identification, wireless positioning system signals and other IoT applications.
It is an ideal solution for IoT applications.
Notes:
1.Please be sure that the power
supply for the module should be at least 5V 2A, otherwise maybe there would be
water ripple appearing on the image.
2.ESP32 GPIO32 pin is used to control
the power of the camera, so when the camera is in working, pull GPIO32 pin low.
3.Since IO pin is connected to camera
XCLK, it should be left floating in using, and do not connect it to high/low
level.
4.The product has been equipped with
default firmware before leaving the factory, and we do not provide additional one’s
for you to download. So, please be cautious when you choose to burn other firmware’s.
FEATURES
Up to 160MHz clock speed Summary
computing power up to 600 DMIPS
Built-in 520 KB SRAM, external 4MPSRAM
Supports UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras,
Built-in Flash lamp.
Support image Wi-Fi upload
Support TF card
Supports multiple sleep modes.
Embedded Free-RTOS
Supports STA/AP/STA+AP operation mode
Support Smart Config technology
Support for serial port local and
remote firmware upgrades (FOTA)
SPECIFICATION
SPI Flash: default 32Mbit
RAM: built-in 520 KB + external
4MPSRAM
Dimension: 27*40.5*4.5(±0.2)mm/1.06*1.59*0.18”
Bluetooth: Bluetooth 4.2 BR/EDR and
BLE standards
Wi-Fi: 802.11b/g/n/e/i
Support Interface: UART, SPI, I2C,
PWM
Support TF card: maximum support 4G
IO port: 9
Serial Port Baud-rate: Default 115200
bps
Image Output Format: JPEG (OV2640
support only), BMP, GRAYSCALE
Spectrum Range: 2412 ~2484MHz
Antenna: onboard PCB antenna, gain
2dBi
Transmit Power: 802.11b: 17±2 dBm
(@11Mbps);
802.11g: 14±2 dBm
(@54Mbps);
802.11n: 13±2 dBm
(@MCS7)
Receiving Sensitivity: CCK, 1 Mbps:
-90dBm;
CCK, 11
Mbps: -85dBm;
6 Mbps
(1/2 BPSK): -88dBm;
54 Mbps
(3/4 64-QAM): -70dBm;
MCS7 (65 Mbps, 72.2 Mbps): -67dBm
Power consumption: Turn off the
flash: 180mA@5V
Turn on
the flash and adjust the brightness to the maximum: 310mA@5V
Deep-sleep: the lowest power consumption can reach 6mA@5V
Modem-sleep:
up to 20mA@5V
Light-sleep: up to 6.7mA@5V
Security:
WPA/WPA2/WPA2-Enterprise/WPS
Power supply range: 5V
Operating temperature: -20 °C ~ 85 °C
Storage environment: -40 °C ~ 90 °C,
< 90%RH
Weight: 10g
Sorry! no video to show.
- Shobra Branch : 0
- Heliopolis Branch : 2
- Stock: 2
- Brand: Chinese
- Model: ESP32-CAM
- SKU: K2-10
- UPC: 3774