Function Generator LWG3010 DDS High Precision high Resolution Frequency 10Mhz
Description
Main Features:
· Direct Digital Synthesis(DDS) technology,2 independent output channels
· 3.5-inch TFT display
· 32 kinds of standard or built-in fixed waveforms
· Minimum stable output waveform: 1mV(50Ω)
· Multiple modulation functions: FM,FSK,ASK,PSK
· Frequency sweep,amplitude sweep and burst functions
· Overvoltage,overcurrent,output short-circuit and reverse voltage protections
· Optional parts:RS232 interface,frequency counter,power amplifier
MODEL (TFT display) |
LWG-3005CH |
LWG-3010CH |
LWG-3015CH |
LWG-3020CH |
Frequency Range(sine) |
40mHz~5MHz |
40mHz~10MHz |
40mHz~15MHz |
40mHz~20MHz |
Technical Specifications
Output Characteristics of Channel A
Waveform Characteristics
Waveform type: 32 waveforms including: Sine, Square, Triangle, Ramp, Pulse etc.
Waveform length: 1024 points Sample rate: 100MSa/s
Waveform amplitude resolution: 8bits
Sinusoidal harmonic rejection: ≥40dBc (<1MHz), ≥35dBc (1MHz~20MHz)
Sine wave total distortion: ≤1% (20Hz~200kHz)
Square rise/fall edge time: ≤35nsOvershoot: ≤10%
Square wave duty cycle: 1%~99%
Frequency Characteristics
Frequency range: Sine: 40mHz~Max. frequency (MHz)Other waveforms: 40mHz~1MHz
Frequency resolution: 40mHz
Frequency accuracy: ±(5×10-5+40mHz)
Frequency stability: ±5×10-6/3 hours
Amplitude Characteristics
Amplitude range: 2mVpp~20Vpp 40mHz~10MHz (high impedance)
2mVpp~15Vpp 10MHz~15MHz (high impedance)
2mVpp~8Vpp 15MHz~20MHz (high impedance)
Resolution: 20mVpp (amplitude>2Vpp), 2mVpp (amplitude<2Vpp)
Amplitude accuracy: ±(1%+2mVrms) (high impedance, true RMS, frequency at 1kHz)
Amplitude stability: ±0.5%/3 hours
Amplitude flatness: ±5% (frequency<10MHz), ±10% (frequency >10MHz)
Output impedance: 50Ω
DC Offset Characteristics
Offset range: ±10V (high impedance, attenuation 0dB) Resolution: 20mVdc
Offset accuracy: ±(1%+20mVdc)
Sweep Characteristics
Linear sweep on frequency or amplitude.
Sweep range: free to set start point and stop point
Additional information
Weight | 4.35 kg |
---|
You must be logged in to post a review.
GA12-N20 Mini DC 6V 30RPM Gear Motor
TEMT6000 Ambient Light Sensor | OutPut Analog light intensity Module
2GT Synchronous Pulley Idler Wheel 5mm Bore Diameter Without Teeth
AC Load Bank LDRM 1Ph40KW
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.