LED Capacitive Touch Dimmer Dual Channel Output for Smart Mirror Lights
touch dimming module can realize the touch switch control and brightness adjustment of LED lights. Has the following functional characteristics and advantages:
⒈The brightness of the light can be adjusted freely according to the needs, the selection range is wide, and the operation is simple and convenient.
⒉ may have medium to realize the touch function (such as glass, acrylic, plastic, ceramic, etc.) isolation protection, the safe.
⒊The application voltage range is 12V .
⒋ Simple application circuit, few peripheral devices, convenient processing and low cost.
⒌Good resistance to power interference and mobile phone interference. EFT can reach more than ± 2KV ; in the case of close-range, multi-angle mobile phone interference,
Touch response sensitivity and reliability are not affected.
6. Installation: There is no need to directly contact the copper foil, and it can be dimmed through acrylic glass or plastic of less than 6mm.
7. Uses: Can control LED modules, light strips and other products. Suitable for indoor table lamp, LED lighting dimming, DIY car lamp dimming modification best accessories.
8. Function: single-line touch, using the principle of capacitive touch, sensitive and sensitive touch. The default is the LED touch stepless dimming function with switch function, dimming function, and brightness memory fades in and out. Slowly brighten when turning on the light, and slowly darken when turning off the light, effectively avoiding eye irritation.
9. Dimming mode: stepless PWM dimming