CAN Module
Brand: Chinese
Model: SN65HVD1050DR-SOP8
Features: • Improved Replacement for the TJA1050
• High Electromagnetic Immunity (EMI)
• Very Low Electromagnetic Emissions (EME)
• Meets or Exceeds the Requirements of As a CAN transceiver, this device provides differential
ISO 11898-2
• CAN Bus-Fault Protection of –27 V to 4..
85.00EGP
Brand: Chinese
Model: SIT1040T -SOP8
DESCRIPTIONThe SIT1040 isthe interface between the Controller Area Network (CAN) protocol controller and
the physical bus. It is primarily intended for high speed applications, up to 1 MBaud, in passenger cars.
The device provides differential transmit capability to the bus anddifferential receive..
25.00EGP
Brand: Chinese
Model: SIT1050T -SOP8
FEATURES:Fully compatible with the ISO 11898 standard
Thermally protected Input levels compatible with 3.3 V and 5 V devices
Transmit Data (TXD) dominant time-out function Silent mode in which the transmitter is disabled Transceiver in unpowered state disengages from the
bus (zero load) At least ..
25.00EGP
Brand: Chinese
Model: TJA1040T-SOP8
The TJA1040 is the interface between the Controller Area Network (CAN) protocol controller and the physical bus. It is primarily intended for high speed applications, up to 1 MBaud, in passenger cars. The device provides differential transmit capability to the bus and differential receive capability..
35.00EGP
Brand: Chinese
Model: SN65HVD230-SOP8
The SN65HVD230 is a high-speed CAN transceiver, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The SN65HVD230 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ..
65.00EGP
Brand: Chinese
Model: MCP2515SMD
The MCP2515 is a second generation stand-alone CAN controller. It is pin and function compatible with the MCP2510 and also includes upgraded features like faster throughput, databyte filtering, and support for time-triggered protocols.
Features
18-pin package
..
75.00EGP
Brand: Chinese
Model: MCP2551-SOP8
The MCP2551 is a high-speed CAN transceiver, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO-11898 standar..
70.00EGP
Brand: Chinese
Model: Dual-DC-Driver-7A
Dual DC Motor Driver 7A 160 Watt Module / board H Bridge L298 logicFunctional characteristics:1. Very small size, only if 5.5 cm * 5.5 cm2. Support voltage from 7V to 24V, undervoltage protection3. Dual motor interface with rated output current 7a4. Similar to L298 control logic, each line supports ..
260.00EGP
Brand: Chinese
Model: TB6612
Module parameters:Function: It can control the positive and negative rotation
of 2 motors (such as balancing the car, only one module is needed)Voltage: 7.6~40VCurrent: Module with current limit protection, 2A
(overcurrent will not be powered off, only limit the maximum output current)Control: 4 P..
155.00EGP
Brand: Chinese
Model: PIC18F452
This powerful 10 MIPS (100 nanosecond instruction execution) yet easy-to-program (only 77 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into an 40- or 44-pin package and is upwards compatible with the PIC16C5X, PIC12CXXX, PIC16CXX and P..
75.00EGP
Brand: Chinese
Model: PIC18F458
Features
5 x 10-bit PWM
40 MHz Max. Speed
Full CAN 2.0B Active 3Tx Buffers
2RX Buffers
6 Full Acceptance Filters
2 Filter Masks
PSP
ICD
Self-Programming
Download
..
55.00EGP
Brand: Chinese
Model: MCP2551-DIP8
The MCP2551 is a high-speed CAN transceiver, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 provides differential transmit and receive capability for the CAN protocol controller and is fully compatible with the ISO-11898 standar..
65.00EGP