Menu
Shopping Cart
Check UGE Offers on all products Shop now

Motor Drivers

Motor Drivers

Motor Drivers IC's  is an electronic device that enables a voltage to be applied across a load in either direction. These devices are often used in robotics and other applications to allow specific motors to run forwards and backwards or in certain steps manner .

Model: CA3086
DESCRIPTION The CA3086 consists of five general-purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected to form a differentially connected pair. The transistors of the CA3086 are well suited to a wide variety of applications in low-power sy..
5.00EGP
Model: L293D
L293D   This is a very useful chip. It can actually control two motors independently. We are just using half the chip in this lesson, most of the pins on the right hand side of the chip are for controlling a second motor, but with the Raspberry Pi, we only have one PWM output. The L29..
12.00EGP
Model: L297
  L297 Stepper Motor Controller The L297 Stepper Motor Controller IC generates four phase drive signals for two phase bipolar and four phase unipolar step motors in microcomputer-controlled applications. The motor can be driven in half step, normal and wawe drive modes and on-chip..
18.00EGP
Model: L298
  Description: The L298N is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Comes in a staggered, 15-lead Multiwatt package. Check below for a bre..
20.00EGP
Model: TB6560
The TB6560AHQ is a stepping motor driver IC designed for sinusoidal-input microstep control of bipolar stepping motors.The TB6560AHQ is capable of low-vibration, high performance forward and reverse driving of a two-phase bipolar stepping motor using only a clock signal.\ it used in our CNC 3-axi..
65.00EGP
Model: TB6600HG
The TB6600HG is a stepping motor driver IC designed for sinusoidal-input microstep control of bipolar stepping motors.The TB6600HG is capable of low-vibration, high performance forward and reverse driving of a two-phase bipolar stepping motor using only a clock signal.\ it used in our CNC..
95.00EGP
Model: ULN2003A
  The ULN2003 is a monolithic IC consists of seven NPN darlington transistor pairs with high voltage and current capability. It is commonly used for applications such as relay drivers, motor, display drivers, led lamp drivers, logic buffers, line drivers, hammer drivers and other high voltag..
5.00EGP
Model: ULN2803A
Description: 8 Darlington Arrays in 18-Pin DIP Package part # ULN2803A. Perfect for running relays and high-power devices up to 500mA and up to 50V! Datasheet  ..
5.00EGP
Model: ULN2804A
Description: 8 Darlington Arrays in 18-Pin DIP Package. Perfect for running relays and high-power devices up to 500mA and up to 50V! Datasheet  ..
4.00EGP
Showing 1 to 9 of 9 (1 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Phone
Comments