KSD-01F Temperature Control Switch Normally Open 90°C Degrees to 220°C

KSD-01F Temperature Control Switch Normally Open 90°C Degrees to 220°C

KSD-01F temperature control switch product introduction:
technical parameters:
contact load: 220VAC 1A or 24VDC 3A
Dimensions (total length × width × thickness): 29.7 × 10.2 × 4.7mm
temperature range: 0℃-130℃ (every 5℃ Type)
contact type: normally closed (-D) or normally open (-H) two
package types: TO-220 metal bottom plate
contact resistance: ≤ 50mΩ
insulation value: ≥100MΩ (500VDC)
insulation strength: 1500V/DC 、60Hz
standard tolerance: ± 5℃
Working environment temperature: -55℃- 160℃ (short-term maximum temperature: 260℃ 10 seconds)
Weight ≤ 2g

Working principle
KSD-01F temperature control switch adopts TO-220 package form, sudden jump The 100% conduction structure of the single-pole/single-throw contact point, when the outside temperature is too high , it is quickly transferred to the corrected bimetallic piece, which cuts off or closes the circuit (normally closed or normally open) Both), when the temperature drops to

When resetting the temperature, the bimetallic sheet resets quickly again

To ensure the safety of product temperature protection.

Product use
suitable for space-saving PC boards. Typical uses include alarm or shutdown systems when circuits overheat; computers and computer peripherals, electrical equipment; electronic products; power supplies; aircraft, automobiles, medical equipment and test equipment; temperature control and thermal overload in household appliances and circuit boards protection