Menu
Shopping Cart
Check UGE Offers on all products Shop now

Lead Acid Battery 12V 1.3AH

Lead Acid Battery 12V 1.3AH
Lead Acid Battery 12V 1.3AH
Lead Acid Battery 12V 1.3AH
Lead Acid Battery 12V 1.3AH
Lead Acid Battery 12V 1.3AH
RECHARGEABLE BATTERY 12V 1.3AH
  • Multi cell design for economy of installation and maintenance
  • Low self-discharge rate
  • Use in any position
    The valve regulated, spill-proof construction of the Polmar battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during over-charge are recombined in a unique "oxygen cycle". Polmar batteries use state of the art design, high grade materials, and a carefully controlled plate-making process to provide excellent output per cell. The high energy density results in superior power/ volume and power/weight ratios.
    Low internal resistance allows discharge currents of up to ten times the rated capacity of the battery. Relatively small batteries may thus be specified in applications requiring high peak currents.
    Special separators, advanced plate composition, and a carefully balanced electrolyte system have greatly improved the ability of recovering from excessively deep discharge.
    Batteries may be used in series and/or parallel to obtain choice of voltage and capacity.
    Due to recent design breakthroughs, the same battery may be used in either cyclic or standby applications. 
    The high watt-hour per dollar value is made possible by the materials used in a sealed lead-acid battery: they are readily available and low in cost.

    this batteries may be discharged over a temperature range of -20°C to +50°C (-4°F to + 122°F) and charged at temperatures ranging from 0°C to +40°C (32°F to +104°F). The high impact resistant battery case is made either of non-conductive ABS plastic or styrene.Large capacity batteries frequently have polypropylene cases. All of these case materials impart great resistance to shock, vibration, chemicals and heat. A low self-discharge ratepermits storage of fully charged batteries for up to a year at room temperature before charging is required. Lower storage temperatures enhance shelf life characteristics even further.
    Under normal operating conditions, four or five years of dependable service life can be expected in stand-by applications, or between 200-1000 charge/discharge cycles depending on average depth of discharge.
     
    Terminal: T1
     
    CAPACITY
     
     
     
     
    DIMENSIONS (mm)
    Nominal voltage 
    V
    20 hour rate F.V.
    1.75V/cell
    A.H.
    L
    W
    T
    TH
    Weight

    kg
    12
    1.3
    98
    45
    50
    56
    0.60
Write a review
Note: HTML is not translated!
Bad Good
  • Availability: SOLD OUT
  • Brand Chinese
  • Model: HB-120130
  • Weight: 0.00kg
  • UPC: well
Products Sold: 1
Product Views: 452
140.00EGP
Tags: lead , acid , battery , 12v , 1 , 3ah , hb-120130