LED Drivers IC
Model: WS2812-6pin
DESCRIPTIONMake your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. This tiny 5050 (5mm x 5mm) RGB LED is fairly easy to solder and is the most compact way possible to integrate multiple bright LEDs to a design. The driver chip is inside the LED..
4.00EGP
Model: WS2812B-F5
DESCRIPTIONMake your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. This tiny 5050 (5mm x 5mm) RGB LED is fairly easy to solder and is the most compact way possible to integrate multiple bright LEDs to a design. The driver chip is inside the LED..
9.00EGP
SOLD OUT
Model: WS2812B-8b
WS2812B RGB Smart LED Stick 8bit NeoPixel development boardSpecifications:Chip:WS2812 LED Color: RGBLED Type: 5050 LEDNumber of Leds: 8Board Color: BlackVoltage: 5V..
65.00EGP
Model: WS2812B-24b
WS2812B RGB Smart LED Ring 24 bit circular NeoPixel development boardSpecifications:Chip:WS2812 LED Color: RGBLED Type: 5050 LEDNumber of Leds: 24Board Color: BlackVoltage: 5V..
120.00EGP
Model: WS2812B-1
DESCRIPTIONMake your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. This tiny 5050 (5mm x 5mm) RGB LED is fairly easy to solder and is the most compact way possible to integrate multiple bright LEDs to a design. The driver chip is inside the LED..
4.00EGP
Model: LED Blue
Description: LEDs - those Blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun Blinky displays.This is a very basic 5mm LED with a blue lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.Features:1.8-2.2VDC forward dropMax..
0.50EGP
SOLD OUT
Brand: Chinese
Model: MAX7219
Description: The MAX7219CNG is a compact, serial input/output common-cathode display driver that can interface microprocessors to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, seg..
60.00EGP
SOLD OUT
Model: LM3914
Description: This is the LM3914 Dot/Bar display analog-controlled LED driver that uses an alinear output scale. With this driver all it takes is a single, analog signal to drive a string of 10+ LEDs, which can be configured into either bar mode (where all LEDs below a certain point turn on) or ..
12.50EGP
SOLD OUT
Model: LM3914
Description: This is the LM3916 Dot/Bar display analog-controlled LED driver that uses a more logarithmic/VU scale, which makes it well-suited to audio applications like VU meters. With this driver all it takes is a single, analog signal to drive a string of 10+ LEDs, which can be configured in..
15.00EGP
Showing 1 to 9 of 9 (1 Pages)