MD9291 Ultra-low-power RFID reader module | UART (TTL) serial communication | 13.56MHz

SKU: MD9291
Out of stock
EGP 120.000
Out of stock
Brand:Chinese
SKU: MD9291 Category: Tags: , , , , , , , , , ,

Description

Features
● High-speed MCU.
● module is small, the size of 43mm × 35mm × 3mm.
● 3.3V-5.5V operating voltage, RS232 (TTL) communication.
● low power, low power consumption compared with the same type of module.
● comply with ISO14443A standard.
 
Technical Parameters
Model MD9291
In line with the agreement ISO14443A
The communication interface RS232 (TTL)
Operating voltage DC 3.3V-5.5V
Working current
Power-down mode: less than 1uA
Operating Current: 14mA (low power consumption, lower than the same type of module)
Peak current: 20mA
Communication speed from 9600 to 115200 (factory default 9600)
Support Card Type Mifare One, Mifare UltraLight
Size 43mm × 35mm × 3mm
Reading distance 3cm-5.5cm (different from the kinds of cards, the standard card 4cm above)
Environment
Working temperature: -20 degrees to + 80 degrees Storage temperature -40 to +85 degrees
Humidity: 5% to 95%
Protocol
2.1 RS232 data format
2.1.1 Data Format
The following data formats are supported by the device:
The following are the default settings:
Parameter Description
Baud rate Optional: 9600,19200,38400,57600,115200
Data bits are fixed: 8 bits
Start bit fixed; 1bits
Stop bit Fixed: 1 bits
Check school None
Baud rate Data bit Start bit Stop bits Parity
9600 8 1 1 None

 

Additional information

Weight 0.005 kg

Brand

Chinese

Chinese
Chinese

Reviews

There are no reviews yet.

Be the first to review “MD9291 Ultra-low-power RFID reader module | UART (TTL) serial communication | 13.56MHz”

Refund Policy for UGE Electronics “Https://uge-one.com “

 

1. Returns and Refunds

Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.

 

2. Eligibility for Refund

To be eligible for a refund, please make sure that:

– The item was purchased in the last 14 days.

– The item is in the original packaging.

– The item isn’t used or damaged.

 

3. How to Initiate a Refund

To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.

 

4. Refund Processing Time

Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.

If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.

 

5. Shipping Costs

Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

 

6. Exchanges

If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.

 

7. Damaged or Defective Items

If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.

 

8. Contact Information

If you have any questions about our Refund Policy, please contact us at [[email protected]].

 

Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.

Product Enquiry

Please Login to make enquiry about this product