MLX90614 Contactless IR Temperature Sensor Module 3.3V I2C IIC Interface Bus
Description
Description
Melexis' MLX90614ESF-AAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614's high accuracy and resolution. It has a huge number of applications including body temperature measurment and movement detection.
The MLX90614 provides two methods of output: PWM and SMBus (i.e. TWI, I2C). The 10-bit PWM output provides a resolution of 0.14°C, while the TWI interface has a resolution of 0.02°C. The MLX90614 is factory calibrated in wide temperature ranges: -40 to 85°C for the ambient temperature and -70 to 380°C for the object temperature. The measured value is the average temperature of all objects in the Field Of View of the sensor. The MLX90614 offers a standard accuracy of 0.5°C around room temperatures.
Features
1、Factory calibrated
2、-40 to +85°C for sensor temperature
3、-70 to +380°C for object temperature
4、SMBus compatible digital interface
5、Customizable PWM output for continuous reading
6、High accuracy of 0.5°C over wide temperature range (0 to +50°C for both Ta and To)
7、Measurement resolution of 0.02°C
8、4.5V~5V power supply
We designed this compact breakout board for MLX90614. On the back side the red LED would indicate power connection.
Click here to download the library. Upload the code to Arduino.
Open Serial Monior, set the baud rate at 9600.
Put my hand before the sensor and the temperature went up to around 35.00 Celcius. It is really accurate.
Before you build your own project with this module, we strongly recommend that you should read the MLX90614 datasheet first.
Additional information
Weight | 0.02 kg |
---|
You must be logged in to post a review.
SMD Chip Resistor size 0603 120R 120 Ohm
HDMI Female Socket Connector 19PIN Right Angle PCB Mounted SMD
STC Microcontroller STC15W408AS-35I-SOP28
NRF24L01 & PA & LNA RF MODULE with External long range Antenna
USB Female PCB Type A Connector SMD Mount
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.