No products in the cart.
MT2492 2A 600Khz Adjustable DC/DC STEP DOWN CONVERTER Regulator IC SMD
In Stock
EGP 20.000 exc. vat
In Stock
Brand:Chinese
Description
The MT2492 is a fully integrated, high– efficiency 2A synchronous rectified step-down converter. The MT2492 operates at high efficiency over a wide output current load range. This device offers two operation modes, PWM control and PFM Mode switching control, which allows a high efficiency over the wider range of the load. The MT2492 requires a minimum number of readily available standard external components and is available in an 6-pin SOT23 ROHS compliant package.
Features:
- High Efficiency: Up to 96%
- 600KHz Frequency Operation
- 2A Output Current
- No Schottky Diode Required
- 4.5V to 16V Input Voltage Range
- 0.6V Reference
- Slope Compensated Current Mode Control for Excellent Line and Load Transient Response
- Integrated internal compensation
- Stable with Low ESR Ceramic Output Capacitors
- Over Current Protection with Hiccup-Mode
- Thermal Shutdown
- Inrush Current Limit and Soft Start
- Available in SOT23-6 Package
- -40°C to +85°C Temperature Range
- DataSheet
Additional information
| Weight | 0.06 kg |
|---|
Brand
Chinese
Chinese
Chinese
You must be logged in to post a review.
SMD Breakout Adapter PCB Board for QFN56 QFN64 0.5mm Packages
EGP 50.000 exc. vat Read more
SMD Chip Resistor size 0603 180R 180 Ohm
EGP 0.250 exc. vat Add to cart
SMD R2512 1W Power Resistors 680R
EGP 3.000 exc. vat Add to cart
LM317 DC-DC Converter Buck Step Down Module
EGP 55.000 exc. vat Read more
Cable Tie 3×100 mm 10PCS
EGP 3.000 exc. vat Read more
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Product Enquiry
Related products
IC SOCKET Base 8 PIN DIP
EGP 2.000 exc. vat Add to cart
GY-271 HMC5883L 3-Axis Compass Magnetometer Sensor Module
EGP 75.000 exc. vat Read more
4 MHZ Resonator 3pin Oscillator
EGP 7.500 exc. vat Read more
Reviews
There are no reviews yet.