OMRON E3JK-R4M1 IR 4Meter photo switch Sensor
Description
Sensing method | Retro-reflective without M.S.R. function |
---|---|
Sensing distance | 0 m to 4 m |
Standard sensing object | Opaque 75 mm dia. Min. |
Directional angle | Sensor:1 to 5 DEG Reflector:40 DEG Min. |
Light source | Red LED (Emission wave length: 660nm) |
Power supply voltage | 12 to 240 VDC -10% to 10% (ripple(p-p) :10% Max.) 24 to 240 VAC -10% to 10% |
Power consumption | 2W DC Max. 2W AC Max. |
Control output (Output type) | Relay output |
Control output (Load current) | 0 to 3 A |
Life expectancy (relay output) | Electrical: 100 thousand times or more(switching frequency 1800 times/hour) Mechanical: 50 million times or more(switching frequency 18000 times/hour) |
Operation mode | Light-ON |
Load power supply voltage | 5 VDC Min. 250 VAC Max. |
Response time | 30ms Max. |
Ambient illuminance | Incandescent lamp:3000 lux Max. |
Ambient temperature | Operating: -25 to 55 ℃ Storage: -30 to 70 ℃ (with no icing or condensation) |
Ambient humidity | Operating: 45 to 85%RH Storage: 35 to 95%RH (with no condensation) |
Insulation resistance | 20 M OHM Min. at 500 VDC between charged parts and the case |
Dielectric strength | 1500 VAC at 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 500m/s2 for 3 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP64 |
Applicable standard (EC Directive (Low Voltage Directive)) | EN60947-5-2 |
Applicable standard (EC Directive (EMC)) | EMI: EN60947-5-2 Emission Enclosure: EN55011 Group 1 class A EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4 |
Conformed standard (EC Directive (CE marking)) | Equipped |
Applicablestandard (CCC mark) | Equipped |
Connection method | Pre-wired models (Cable length: 2 m) |
Indicator | Light indicator(red) |
Weight (packed state) | Approx. 250 g ,PDF |
Material (case) | ABS |
Material (lens) | Methacrylate resin |
Material (mounting bracket) | Iron |
Accessories | Instruction manual, Mounting bracket(with screws), Nut, Reflector |
Additional information
Weight | 0.22 kg |
---|
You must be logged in to post a review.
DB25 Gender Changer Connector Fem
2 Watt DC – DC Isolation Power Supply 24V To 5V B2405-2WR2 Module
0805 SMD Chip Resistor 240R
APC Easy UPS SMV 3000VA, Schuko Outlet, 230V SMV3000AI-GR
Trimmer Variable Capacitor 20pF
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.