Original Dust Particulate Matter Sensor SPS30

MCERTS-Certified

The Original Dust SPS30 particulate matter sensor has achieved MCERTS certification, which proves the performance of the PM sensor. In addition, the certification confirms that the SPS30 can be easily integrated into applications that comply with the European Air Quality Standard DIN EN 15267.

The MCERTS certification scheme was established by the UK’s Environment Agency and is built around international and European standards to ensure high-quality environmental data monitoring. The SPS30 underwent laboratory and field tests and has been proven to fulfill the latest MCERTS and associated DIN EN 15267 European air quality standards.  Compliance with the above-mentioned standards requires low intra-model variability (≤ 5 µg/m3), making the SPS30 the first choice for integration into applications requiring high precision. The certification is issued by the Sira Certification Service, one of the leading notified bodies in Europe. They are also accredited according to ISO/IEC 17065 UKAS and are part of the Canadian Standards Association (CSA Group).

Sensor Specifications

Original Dust Particulate Matter Sensor Specifications

Mass concentration precision1  

±10 μg/m3 @ 0 to 100 μg/m3

 ±10 % @ 100 to 1000 μg/m3

 Mass concentration range            1 to 1000 μg/m3

Mass concentration resolution   1 μg/m3

Particle detection size range2     Mass concentration:   PM1.0, PM2.5, PM4 and PM10

Number concentration:  PM0.5, PM1.0, PM2.5, PM4 and PM10

Lower limit of detection 0.3 μm

Minimum sampling interval         1 sec (continuous mode)

Lifetime               > 10 years operating continuously 24h/day

Dimensions        40.6 x 40.6 x 12.2 mm3

Operating temperature range    -10 to +60 °C

Storage temperature range         -40 to +70 °C

Electrical Specifications

Interface             UART, I2C

Supply voltage   4.5 – 5.5 V

Average supply current @ 1 Hz measurement rate           55 mA

Documents:

• Datasheet