Robotic Arm with DC Motors and Manual Control
Description
The Robotic Arm Edge Kit is a fun project that allows you to build a robotic arm with five degrees of freedom and a gripper.
This robotic arm uses five gearbox motors to produce 5 DOF Degrees Of Freedom. The base provides 270° of rotation with 180° of movement at the shoulder. The arm bends 300° at the elbow and the wrist can turn a full 120°. The two fingered gripper claw can open as wide as 1.77 inches and features a bright white LED.
It’s not an industrial robot arm used for manufacturing: it can only lift up to three and a half ounces. A built in gear protection mechanism will produce an audible clicking sound when overloaded.
This kit is primarily intended to teach the principals of robotic arm technology. After assembly, this kit is operated by a kid friendly five button wired remote. A PC USB Interface is available separately to increase the functionality and educational value. This is a hackable kit and people have had success controlling the arm using a variety of microcontrollers.
The Robotic Arm Edge Kit can be assembled in about an hour by following the detailed step by step instructions. No soldering is required. A Phillips screwdriver, wire cutters and long-nose pliers are needed for assembly.
Manufacturer recommended for ages 13 and up. Younger children should seek assistance from adults but can participate in assembly by helping to identify parts and learning to use a screwdriver. Operating the robotic arm requires four D sized batteries which are not included.
Additional information
Weight | 0.01 kg |
---|
You must be logged in to post a review.
Pressure Transducer / SB3111-C-1-21M- M12-X1.5-S-ZC1- CW
SGM3204YN6G Unregulated 200mA Charge Pump Voltage Inverter SOT23-6
Arduino MEGA Sensor Shield V1.0
1210 Smd Multilayer Ceramic Chip Capacitor 10uF 16V
3V Battery Type CR2032 Remote Control and RTC application
SN74LS76 DUAL J-K FLIP FLOP TTL Logic IC
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.