No products in the cart.
Smallest Arduino Pro Micro with ATmega32U4 5V/16MHz Compatible Board
In Stock
EGP 850.000 exc. vat
In Stock
Brand:USA
Description
PICO is the development board that you’ll use whenever you work on a project where size and flexibility matter. It’s based on the ATmega32u4 microcontroller. It has 5 I/O pins, 3 analog pins, and 3 SPI enabled pads on the bottom side of the board. But, what makes it really special is the 0.6”x0.6” size and 1.1g weight, which lets you make everything around you function and work better, without a bulky board in the way.
Here are the technical details for PICO:
| Size: | 15 x 15 mm |
| Weight: | 1 Grams |
| Digital I/O Pins: | 12 |
| PWM Channels: | 4 |
| Analog Input Channels: | 4 |
| DC Current per I/O Pin: | 20 mA |
| SRAM: | 2.5 (ATmega32u4) |
| Reset Enable: | 1 pin/button |
| Microcontroller: | ATmega32u4 |
| Operating Voltage: | 5 V |
| Input Voltage: | 7-12 V |
| Bootloader: | Leonardo Compatible |
| Flash Memory: | 32KB (ATmega32u4) 4KB which are used by the bootloader |
| Clock Speed: |
16 MHz |
Additional information
| Weight | 0.0129 kg |
|---|
Brand
USA
You must be logged in to post a review.
SMD Chip Resistor size 1206 150R Ohm
EGP 0.500 exc. vat Read more
Voltage Regulator XC6206P332MR 200mA 3.3V LDO SOT23
EGP 10.000 exc. vat Add to cart
Plastic Potentiometer Knob
EGP 5.000 exc. vat Add to cart
I-Shape 8x10mm Power Coil Inductor 47uH
EGP 6.000 exc. vat Read more
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Product Enquiry
Related products
3%
Pen Plotter and GRBL CNC 2 axis Control board
EGP 495.000 exc. vat Add to cart
2.7V 30F Farad Automotive grade Ultra Super Capacitor
EGP 125.000 exc. vat Add to cart
PT2262 RF remote control system Encoder SMD SOP 20Pin
EGP 20.000 exc. vat Add to cart
Cylinderical Round 17x15mm Nickel plated Magnet
EGP 15.000 exc. vat Read more
Reviews
There are no reviews yet.