Soft starter for asynchronous motor – ATS01 – 22 A – 380..415V – 7.5..11 KW (ATS01N222QN)

SKU: ATS01N222QN
Out of stock
EGP 3,760.000
Out of stock
SKU: ATS01N222QN Category: Tags: , , , , , , , , , , ,

Description

ATS01N222QN

Soft starter for asynchronous motor – ATS01 – 22 A

– 380..415V – 7.5..11 KW


Characteristics 


range of product             

Altistart 01

product or component type       

Soft starter

product destination       

Asynchronous motors

product specific application        

Simple machine

device short name         

ATS01

network number of phases        

3 phases

[Us] rated supply voltage            

380…415 V – 10…10 %

motor power kW            

11 kW 3 phases 380…415 V

7.5 kW 3 phases 380…415 V

IcL starter rating              

22 A

utilisation category         

AC-53B EN/IEC 60947-4-2

current consumption    

110 A at nominal load

type of start      

Start with voltage ramp

power dissipation in W 

124.5 W in transient state

4.5 W at full load and at end of starting

Complementary

assembly style 

With heat sink

function available           

Integrated bypass

supply voltage limits      

342…456 V

supply frequency            

50…60 Hz – 5…5 %

network frequency        

47.5…63 Hz

output voltage 

<= power supply voltage

[Uc] control circuit voltage          

Built into the starter

starting time     

1 s 100

10 s 10

5 s 20

Adjustable from 1 to 10 s

deceleration time symb               

Adjustable from 1 to 10 s

starting torque 

30…80 % of starting torque of motor connected directly on the line supply

discrete input type         

Logic LI1, LI2, BOOST stop, run and boost on start-up functions <= 8 mA 27 kOhm

discrete input voltage   

24…40 V

discrete input logic         

Positive LI1, LI2, BOOST < 5 V and <= 0.2 mA > 13 V >= 0.5 mA

discrete output current

2 A DC-13

3 A AC-15

discrete output type     

Open collector logic LO1 end of starting signal

Relay outputs R1A, R1C NO

discrete output voltage

24 V 6…30 V open collector logic

minimum switching current        

10 mA 6 V DC relay outputs

maximum switching current       

2 A 250 V AC inductive cos phi = 0.5 20 ms relay outputs

2 A 30 V DC inductive cos phi = 0.5 20 ms relay outputs

display type       

1 LED green starter powered up

1 LED yellow nominal voltage reached

tightening torque           

0.5 N.m

1.9…2.5 N.m

electrical connection     

4 mm screw clamp terminal rigid 1 1…10 mm² AWG 8 power circuit

Screw connector rigid 1 0.5…2.5 mm² AWG 14 control circuit

4 mm screw clamp terminal rigid 2 1…6 mm² AWG 10 power circuit

Screw connector rigid 2 0.5…1 mm² AWG 17 control circuit

Screw connector flexible with cable end 1 0.5…1.5 mm² AWG 16 control circuit

4 mm screw clamp terminal flexible without cable end 1 1.5…10 mm² AWG 8 power circuit

Screw connector flexible without cable end 1 0.5…2.5 mm² AWG 14 control circuit

4 mm screw clamp terminal flexible with cable end 2 1…6 mm² AWG 10 power circuit

4 mm screw clamp terminal flexible without cable end 2 1.5…6 mm² AWG 10 power circuit

Screw connector flexible without cable end 2 0.5…1.5 mm² AWG 16 control circuit

marking               

CE

operating position          

Vertical +/- 10 degree

height  

154 mm

width   

45 mm

depth   

131 mm

product weight

0.56 kg

compatibility code          

ATS01N2

Motor power range AC-3            

7…11 kW at 380…440 V 3 phases

motor starter type         

Soft starter

Environment

electromagnetic compatibility   

Damped oscillating waves level 3 IEC 61000-4-12

Electrostatic discharge level 3 IEC 61000-4-2

Immunity to electrical transients level 4 IEC 61000-4-4

Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3

Voltage/current impulse level 3 IEC 61000-4-5

Conducted and radiated emissions level B CISPR 11

Conducted and radiated emissions level B IEC 60947-4-2

EMC immunity EN 50082-2

Harmonics IEC 1000-3-2

Harmonics IEC 1000-3-4

Immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6

Micro-cuts and voltage fluctuation IEC 61000-4-11

EMC immunity EN 50082-1

standards           

EN/IEC 60947-4-2

product certifications    

B44.1-96/ASME A17.5 for starter wired to the motor delta terminal

CCC

CSA

C-Tick

GOST

UL

IP degree of protection

IP20

pollution degree             

2 EN/IEC 60947-4-2

vibration resistance       

1.5 mm peak to peak 3…13 Hz EN/IEC 60068-2-6

1 gn 13…150 Hz EN/IEC 60068-2-6

shock resistance              

15 gn 11 ms EN/IEC 60068-2-27

relative humidity             

5…95 % without condensation or dripping water EN/IEC 60068-2-3

ambient air temperature for operation 

-10…40 °C without derating

40…50 °C with current derating of 2 % per °C

ambient air temperature for storage     

-25…70 °C EN/IEC 60947-4-2

operating altitude           

<= 1000 m without derating

> 1000 m with current derating of 2.2 % per additional 100 m

Additional information

Weight 0.005 kg

Brand

Schneider Electric

APC Schneider Electric UPS

Reviews

There are no reviews yet.

Be the first to review “Soft starter for asynchronous motor – ATS01 – 22 A – 380..415V – 7.5..11 KW (ATS01N222QN)”

Refund Policy for UGE Electronics “Https://uge-one.com “

 

1. Returns and Refunds

Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.

 

2. Eligibility for Refund

To be eligible for a refund, please make sure that:

– The item was purchased in the last 14 days.

– The item is in the original packaging.

– The item isn’t used or damaged.

 

3. How to Initiate a Refund

To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.

 

4. Refund Processing Time

Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.

If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.

 

5. Shipping Costs

Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

 

6. Exchanges

If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.

 

7. Damaged or Defective Items

If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.

 

8. Contact Information

If you have any questions about our Refund Policy, please contact us at [[email protected]].

 

Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.

Product Enquiry

Please Login to make enquiry about this product