Oscilloscope 100MHz Dual Channel Color

SOLD OUT Oscilloscope 100MHz Dual Channel Color
Technical Parameters    
Product TypeADS1102CADS1062CADS1042CADS1022C
Screen DisplayColorColorColorColor
Bandwidth100MHz60MHz40MHz25MHz
Screen Size5.7 " color LCD screen / monochrome, waveform display more clear and natural
Memory Depth4K 1M
Real-time sampling rate500MSa / s
Equivalent sampling rate50GSa / s
Rise time< 3.5ns< 5.8nS< 8.8nS< 14ns
Input impedance1M Ω‖ 13pF1M Ω‖ 13pF1M Ω‖ 13pF1M Ω‖ 13pF
Timebase range2.5nS / div ~ 50S / div
Roll: 100mS ~ 50S / div
5nS / div ~ 50S / div
Roll: 100mS ~ 50S / div
10nS / div ~ 50S / div
Roll: 100mS ~ 50S / div
25nS / div ~ 50S / div
Roll: 100mS ~ 50S / div
Lissajous 
General parameters    
Throughchannel number2 (CH1 / CH2)   
Verticalstraight Sensitivity2mV-5V / div (1-2-5 sequence )   
Verticalstraight Resolution8 bit   
Memorystorage depthSingle-channel 4K-1M   
Wave -shaped capture rateHighest over 1000 times / sec.   
Input into the couplingDC, AC, grounding   
The large input voltage400V (peak to peak)   
Touch Hair TypeEdge of the pulse, the video delay, alternating   
Touch hair patternAuto, Normal, Single   
Touch originCH1 , CH2 , EXT , EXT / 5 , AC Line   
Reservedeposit /transfer outProviding two groups reference waveforms, 20groups of ordinary waveform, 20 species set the internal storage / Recall function; support Udisk external storage / Recall function   
Since moving measurement type
(<, / SPAN>32 species )
Maximum, minimum, top value, the bottom value, peak to peak, Mean, Cycle Mean, RMS, Cycle RMS, amplitude, rise excesses, up front shock, drop excesses, before declining shock rise time, fall time, frequency, period, pulse width, Positive Width, Negative Width, Positive Duty Cycle, Negative Duty Cycle, Phase, FRR , FRF , FFR ,LRR , LRF , LFR , LFF   
Lightstandard measurementManual mode, Track mode, the automatic measurement mode   
Mining sample modeReal-time sampling, the equivalent sampling   
Ping average number of4 , 16 , 32 , 64 , 128 , 256   
Number ofmath#ERROR!   
XY squarestylePhase shift: ± 3 Degrees
Support 5KSa / s ~ 200MSa / S sampling rate (1-2-5 sequence )
   
Display shows the languageSimplified Chinese, Traditional Chinese, English, German, French, Japanese, Korean, Russian, Arabic, Spanish, Portuguese   
Power source100 ~ 240VAC , 47Hz ~ 440Hz , 50VA Max   
Feet inches305 * 154 * 133mm   
Heavy volumeAbout 2.2 kg   
Attachedpieces1: 1 , 10: 1) probe * 2 , power cord, EasyScopecomputer software systems, manual
USB Host: Support U disk upgrades and firmware upgrades;
USB Device: Support PictBridge direct printing and thePC connection.
   
OptionselectionGPIB communication module, serial module, Pass / Failinterface module   

 

Features

● Features and Benefits ● Abundant trigger ● FFT waveform split-screen display pop-up menu mode ● ● Multi-language interface display function ● Display● cursor measurement function ● Pass / Fail function ● Powerful EasyScope3.0 monitoring software ● Standard Accessories ● Performance Parameters


Features and Benefits:
● 500MSa / s (500MSa / s) in real-time sampling rate and 50GSa / s equivalent sampling rate;
● USB Host / Device , support EasyScope2.0 software system, U disk storage;
● supports PictBridge direct printing protocol;
● 32 kinds of automatic measurement functions, supports all measurements simultaneously open function;
● The new slim design, compact and more convenient to carry;
● color TFT LCD display, waveform display is more clear and stable;
● Dual-channel bandwidth: 25MHz ~ 100MHz ;
● unique digital filtering, waveform recording and Pass / Fail function;
● manual tracking, automatic cursor measurement function;
● pop-up menu mode, the user operation more flexible, natural;
● Channel waveform and FFT waveform simultaneous split-screen display;
● Multilingual interface display, the English online help system;

Abundant trigger
ADS1000 series of products with richer trigger functions: A variety of trigger modes Edge, Video, alternately, delay, etc., greater scope to meet the needs of users. Which alternate trigger mode can be used to observe two non-related signals, you can select different trigger modes for the two channels, is an analog oscilloscope function in the digital oscilloscope attention, but also reflects the ADS1000 series product research and development team in technology strong field;


FFT waveform split-screen display function
Channel waveform and FFT waveform split-screen simultaneous display, split-screen mode, the screen is divided into upper and lower portions are re-direction perpendicular to 8 grid, like full-screen mode while observing the two waveforms, this approach allows users to observe the waveform clearer, convenient, but also reflects the ADS1000 series products more human side;


Mode pop-up menu
ADS1000 series of products using the pop-up menu display mode, the menu can be hidden at any time of the waveform 12 grid full screen display, the same grade as compared with other digital oscilloscope, this model is more flexible; user operation more convenient, more clearly observed waveform.


Multi-lingual interface display function
ADS1000 series has 11 different languages ​​interface display function: Simplified Chinese, Traditional Chinese, English, German, French, Japanese, Korean, Russian, Arabic, Spanish, Portuguese, and further develop theADS1000 series product international market for the ADS1000 series build for the international famous brand products laid the foundation;


Display
ADS1000 series of products using color TFT LCD screen, the screen display parameter value and the waveform is more clear and stable, naturally; but also more conducive to slow down the user for a long time observing the waveform cause eye fatigue;


Cursor measurements
ADS1000 series cursor measurement function has three modes: manual mode, tracking mode, auto mode. Users can flexibly select the measurement mode according to their needs, making it easier to read the measurement results or experience fully automated intelligent design mode in the upper right of the screen;


Pass / Fail function
Users can use the ADS1000 family provides the Pass / Fail function for product testing, automatically output the test results through a series of settings, greatly improving production efficiency;


Powerful EasyScope3.0 monitoring software
EasyScope3.0 monitoring and control software for the A DS1000 strong performance software system family of products, the software is compatible with RS-232 and USB Device , to achieve communication between the computer and the oscilloscope, so as to realize the remote control. At the same time the software can automatically refresh real-time waveform data, provide waveforms, measurement data to take into account the sampling data, save and print functions; transferring the oscilloscope screen completely true picture; also has a configuration upload and download functions; fastest millisecond-based PC and ADS1000 interaction between series, allowing users to more easily analyze, research waveforms and data;

 

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 1542
  • Product Code: ATTEN ADS1102C
  • SKU Code: Store
  • Availability: SOLD OUT
2 Product(s) Sold
  • 3,100.00LE

Tags: Oscilloscope 100MHz Dual Channel Color, ATTEN ADS1102C, Oscilloscope