Upper and Lower Limit Voltage Comparator Double Limit Voltage adjustable range is 0-32V
Description
Description
Set the upper and lower limit voltage on the module, input the sampling voltage from [3] or [4],
when the input voltage value is within the set upper and lower limits Within the voltage range, the relay is closed.
When the input voltage of [3] or [4] is greater than or less than the set upper or lower limit voltage, the relay is turned off.
Upper and lower limit voltage:
After the upper and lower limit voltage is set, it is not affected by the voltage change of the module power supply [1-2], adjustable range is 0-32V.
Module use:
industrial control,
constant temperature
control,
solar charge protection,
battery charge and discharge control
Working voltage:
DC4.5 ~ 28V
Working current:
80ma
Size:
71×48.5x20mm (length x width x height)
Module Wiring diagram (max. 10A),
[1] Module positive input
[2] Module negative input
[3] Channel one detection voltage positive input
[4] Channel two detection voltage positive input
[5] Channel lower limit voltage adjustment potentiometer, clockwise increase the voltage value
[6] Channel 1 upper limit voltage adjustment potentiometer, clockwise rotation voltage value increases
[7] Channel two lower limit voltage adjustment potentiometer, clockwise rotation voltage value increases
[8] Channel two upper limit voltage adjustment potentiometer, clockwise rotation voltage value increases Remarks: The multimeter measures the voltage at the corresponding test point behind the potentiometer. The voltage value is the corresponding setting value.
[9] Channel 1 relay status indicator, relay suction and light on, relay disconnection light off
[10] channel 2 relay status indicator, Relay suck and light on, relay off light off
[11] channel two relay normally open foot
[12] channel two relay common foot
[13] channel two relay normally closed foot
[14] channel one relay normally open foot
[15] channel One relay common pin
[16] Channel one relay normally closed foot
[17] Power indicator,
[1-2] Input power correctly, indicator is always on
Additional information
Dimensions | 7.1 × 4.85 × 2 cm |
---|
You must be logged in to post a review.
SN74LS157
AAA Battery shrapnel spring positive and negative Contacts 21x10mm
RASPBERRY PI/PI2 B plus GPIO T-COBBLER BOARD
M3 x 10mm Male-female Brass Hex PCB Standoff Spacer
Arduino KY-003 Hall magnetic sensor module
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.