Description
IR2110
High and Low Side Driver, All High Voltage Pins On One Side, Separate Logic and Power Ground, Shut-Down
Active
Benefits
Floating channel designed for bootstrap operation
Fully operational to +500V or +600V
Tolerant to negative transient voltage
dV/dt immune
Gate drive supply range from 10 to 20V
Undervoltage lockout for both channels
3.3V logic compatible
Separate logic supply range from 3.3V to 20V
Logic and power ground ±5V offset
CMOS Schmitt-triggered inputs with pull-down
Cycle by cycle edge-triggered shutdown logic
Matched propagation delay for both channels
Outputs in phase with inputs
Parameter | Value |
---|---|
Channels | 2 |
Topology | High Side and Low Side |
Voffset | 500 |
Io+(mA) | 2500 |
Io-(mA) | 2500 |
VBSUV+ / VCCUV+ Typ (V) | 8.6 |
VBSUV- / VCCUV- Typ (V) | 8.2 |
T on typ (ns) | 120 |
T off typ (ns) | 94 |
Package | 14 or 16 Lead |
Qual Level | Industrial |
MSL | 3 |
Base Part Status | Active |
VBSUV- / VCCUV- Min (V) | 7.0 |
RoHS | Yes |
VBSUV+ / VCCUV+ Max (V) | 9.7 |
Halogen-Free | Yes |
1k Budgetary Pricing | 1.094 |
Separate Power and Logic Ground | Yes |
UVLO | Vcc / Vbs |
VBSUV+ / VCCUV+ Min (V) | 7.5 |
ShutDown / Reset | Yes |
VBSUV- / VCCUV- Max (V) | 9.4 |
Technology | HVIC |
Additional information
Weight | 0.002 kg |
---|
You must be logged in to post a review.
DMM AVOMETER Test Lead Probes
Servo Motors / ESC Consistency Tester
2 Watt DC – DC Isolated DC-DC Power Supply 12V To 15V B1215S-2WR2 Module
Crystal Oscillator 2Pin HC-49S 12MHZ
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.