Description
RCD trip time test:
× 1/2 scale test does not work rated current.
× 1 / × 5 scale test RCD trip time.
Residual current test: automatically use different current testing residual current value.
Remote Testing:
Testing key lock can be operated with both hands after the test line.
Automatic test after detecting the primary voltage.
Voltage test: each range standby mode test rated voltage.
Automatically detect contact voltage:
When RCD testing, detection or protection grounding conductor to ground voltage.
Used in the test ground to avoid an electric shock (after applying a test current).
AC50V over when to stop testing.
Backlight function: suitable for a dark place operations.
Waterproof and dustproof: Designed to meet international safety standard IEC60529 (IP54).
R
C D jump off time between left I power flow measurement test |
Range
|
× 5
|
× 1
|
× 1/2
|
Residual current (mA)
|
|
Rated voltage
|
100A ± 10% 200V ± 32% / – 10% 400V ± 10% (50 / 60Hz)
|
|||||
Test Current
|
15/30/50 / 100mA
|
15/30/50/100/200 / 500mA
|
15/30/50/100/200 / 500mA
|
|||
Test range
|
Test time
200ms |
Test time
2000ms |
Test time
2000ms |
40% ~ 110% lΔn of
(5% rise) test time 300ms × 15 times |
||
Accuracy
|
Trip time
|
± 1% rdg ± 3dgt
|
± 1% rdg ± 3dgt
|
± 1% rdg ± 3dgt
|
Each test current
~ + 4% -4% |
|
Test Current
|
+ 2% rdg ~ ± 8% dgt
|
+ 2% rdg ~ ± 8% dgt
|
-8% Rdg ~ -2% dgt
|
|||
Voltage Test
|
Test range
|
80V ~ 450V (50 / 60Hz)
|
||||
Accuracy |
± 2% rdg ± 4dgt
|
|||||
Safety Specifications
|
IEC61010-1 CAT.III 300V / CAT.II 400V Pollution degree 2
IEC61010-031, IEC61557-1,6, IEC60529 (IP54) |
|||||
Show
|
1999 counts (3.5 digital display), LCD big screen
|
|||||
Use of temperature and humidity range
|
0 ℃ ~ 40 ℃ relative humidity below 85%, non-condensing
|
|||||
Save temperature and humidity range
|
-20 ℃ ~ 60 ℃ relative humidity below 85%, non-condensing
|
|||||
Withstanding Voltage
|
AC3700V / min (electrical circuit between the outer box)
|
|||||
Insulation Resistance
|
≥50MΩ / 1000V (between electrical circuit and outer carton)
|
|||||
Automatic shutdown
|
After about 3 minutes automatic shutdown operations, (current consumption of about 75μA), this feature is not available for voltage testing. To exit this mode, the function switch is set to become OFF, select the required test range again. After one minute the backlight lights on, off automatically.
|
|||||
Power supply
|
DC12V / AA batteries R6P (SUM-3) × 8
|
|||||
Dimensions
|
186 (L) × 167 (W) × 89 (D) mm
|
|||||
Testing times
|
More than 1200 times (time × 1/2 range, every 30 seconds test, lΔn = 100mA)
|
|||||
Accessories
|
7128A (test line), 7129A (alligator clip test line), 8017 (long probe) × 2
9147 cable boxes, 9121 strap, manual, battery R6P (SUM-3) × 8 |
Additional information
Weight | 0.36 kg |
---|
You must be logged in to post a review.
NCV7356D1R2G Single Wire CAN Transceiver SMD SOP8
Nokia 5110 LCD Screen module
PCB For 5 CH Relay Module
eSUN 3D PLA plus 1.75mm – Gold Color
Carbon Resistor 0.25W 270K Ohm
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.