CNC Interface Card With TB6560 4-axis Motors Driver 3A (3.5A Peak)
Description
Applicable to the stepper motor: 42,57,86-type phase current is less than 3A of the 2-phase 4-phase (4-wire line and 8 lines)
1.Maximum phase current output of 3.5A, the average output of 2.5A.
2.with spindle control relay, mach3, etc. easy to use software to control the start and stop of the spindle.
3.high speed optocoupler DC / DC fully isolated from the true sense of protecting your computer.
4.with 5-axis expansion, and convenience you require 5-axis machining, 5-axis extension.
5.Standard parallel port interface, support for MACH2, KCAM4 series software.
6.Supports four sub select – 1,1 / 2,1 / 4,1 / 16.
7.four input control, you can set the limit, stop, reset, which is divided into the knife.
8.support four operating modes – mixed-mode, fast mode, slow mode, the ordinary mode.
9.the semi-flow control functions, effective to stop the motor when the current drops to a minimum.
10.Have fan interface, you can add a fan to the board.
Dimensions: 178mm long * 153mm wide (pcb board size) Weight: 0.8kg (including parallel cable):
High-speed optocouplers and DC / DC circuit isolation, electrical isolation, rather than only the optocoupler false isolation. External current fleeing, it will not burn your computer, high-speed optocoupler 6N137 maximum transfer rate of up to 10MBit / S (ordinary optocoupler only a few KB transfer rate, it is easy to lose steps) to protect your computer while also ensure that the motor is not lost step, which is our drive and the market a lot of difference between one here to remind buyers at the time of purchase must be careful to do and burn your own computer is not worth the cheap little money:
Additional information
Weight | 0.039 kg |
---|
You must be logged in to post a review.
BC108
MK3 3D Printer Heated Bed Aluminum 400x400mm 12v / 24v
Dual DC Motor Driver 10A
APC Smart-UPS RT 6kVA 230V SRTG6KXLI
ESC Mystery 30A Brushless Speed Controller MultiCopter
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.