- Additional information
- Reviews (0)
- More Products
- Warranty Policy
- Product Enquiry
- Can withstand high current overload, the maximum current up to 10A, driving 200w motor.
- This drive also has a brake function can be quickly.
- The drive uses the full two half-bridge driver IC +low resistance N-channel MOSFET components.
- Complete two half-bridge driver IC reliable drive mode, the MOSFET switching losses to a minimum. Improve power utilization. MOSFET driver chip comes with hardware brake function and power feedback feature.
N-channel MOSFET IRF3205 MOSFET, using two dedicated half-bridge driver chip on the tube using the bootstrap capacitor, the tube has sufficient driving voltage, the MOSFET channel can be opened quickly, improve acceleration curvature of the motor, but also quickly for motor braking. This can make the car can quickly start can quickly kill the car.
The drive can operate in 0% -99% of the duty cycle of the PWM modulation, so that the motor can get enough drive voltage.
Module Signal table:
Motor forward: DR = 1 PWM = PWM
Motor reversal: DR = 0 PWM = PWM
Parking brake: DR = X PWM = 0
Motor and power connections
Then the power pins are VCC, GND . Two motors were connected to OUTA1 OUTA2, OUTB1 OUTB2.
Product performance parameters:
- Control Voltage: 3-5v
- Rated voltage: 10v-24v
- Current Rating: 10A
- Peak Current: 10A
- Dimensions: length 80mm, width 55mm
Use: Freescale smart car contest Undergraduate Electronic Design Contest variety of DC motor control circuit
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [Refund@uge-one.com] or . Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [Refund@uge-one.com].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.