0.96-inch 160×80 IPS LCD Module with ST7735 Controller

• 0.96″ diagonal IPS display, color is more vivid than an ordinary TFT LCD screen
• Size: 0.96-inch
• 160×80 resolution, 16-bit color, 65K Full color
• Direction can adjust to horizontal or vertical
• Control chip: ST7735
• 4 wire SPI digital interface or I2C (IIC)
• Number of breakout pins: 7
• Display area: 10.8 x 21.696mm
• 5V compatible! Use with 3.3V or 5V logic
• Onboard 3.3V @ 150mA LDO regulator, using 5V will provides better brightness and good viewing effect
• 1 white LED backlight, transistor connected so you can PWM dim the backlight
• 0.1″ pitch header for easy breadboarding
• 2 removable mounting holes in corners
• Current draw is based on LED backlight usage: with full backlight, current draw is ~25mA
• Working temperature: -20~70°C
• Working voltage: 3.3V
• Physical size: 24 x 30mm

Interface definition:

• GND (Power ground)
• VCC (Power +3.3 or 5V)
• SCL (SPI clock line)
• SDA (SPI data line)
• RES (LCD reset, LCD needs to be reset once after power-on)
• DC (SPI data/command selection pin)
• BLK (LCD backlight control, the default can be left floating, low level to turn off the backlight)

• 1 x 0.96-inch 160×80 IPS LCD Breakout – ST7735

• ST7735S interfacing with ESP32, tutorial to use it with Node32-Lite.
• ESP32 + 1.3 inch 240×240 IPS LCD (ST7789 SPI interface), using TFT_eSPI library, interface with ESP32 and we have verified it. You will need to choose the correct driver for ST7735.
• Tutorial – Using the 0.96″ 80 x 160 Full Color IPS LCD Module with Arduino, by tronixstuff.com
• Modified UTFT library for 160×80 ST7735S display modules and also for ESP8266, Github by nyh
• Tutorial by Adafruit, not exactly the same breakout, but the library and wiring are compatible
• ST7735 Datasheet