KU5590A sound and light controlled Lamp timer Switch IC SMD SOP8
Description
1. Introduction of chip characteristics
- The chip has built-in high-voltage and low-voltage conversion circuits, which can do DC and AC solutions
- Supports two-wire and three-wire working modes at the same time, easy to use
- Low power consumption, high efficiency working state
- Low cost, built-in timer, simple peripheral, wide temperature range
- Can be applied to sound and light control lamps, sound and light control switches, tact switches, touch switches, etc.
2. Chip principle description
High integration, simple peripheral, not affected by ambient temperature, sensitivity can be fine-tuned by external circuit, timing delay time, low cost, stable performance
3. Chip technical parameters
parameter |
minimum |
Typical value |
maximum value |
unit |
||
temperature range |
-40 |
20 |
85 |
°C |
||
static current |
KU5590 |
|
17 |
20 |
uA |
|
KU5595 |
|
4.5 |
5 |
|||
Input voltage (only reflect AC) |
|
220 |
380 |
V |
||
Sensitivity |
|
5 |
|
Lux |
||
gain Sensitivity |
KU5590 |
28 |
30 |
33 |
dB |
|
KU5595 |
38 |
40 |
43 |
|||
Anti-static level |
|
4 |
|
Kv |
4. Typical application circuit
Additional information
Weight | 0.009 kg |
---|
You must be logged in to post a review.
CEP540N TO-220 MOS MOSFET 36A 100V
2pin 70Cm Long Endstop Cables with Fem/Fem Connector
SN-2549 Crimper pliers tool for terminals
3D Printer Extruder Pipe Screw M6x30
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.