Description
-
Multi cell design for economy of installation and maintenance
-
Low self-discharge rate
-
Use in any positionThe valve regulated, spill-proof construction of the Polmar battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during over-charge are recombined in a unique “oxygen cycle”. Polmar batteries use state of the art design, high grade materials, and a carefully controlled plate-making process to provide excellent output per cell. The high energy density results in superior power/ volume and power/weight ratios.Low internal resistance allows discharge currents of up to ten times the rated capacity of the battery. Relatively small batteries may thus be specified in applications requiring high peak currents.
Special separators, advanced plate composition, and a carefully balanced electrolyte system have greatly improved the ability of recovering from excessively deep discharge.
Batteries may be used in series and/or parallel to obtain choice of voltage and capacity.Due to recent design breakthroughs, the same battery may be used in either cyclic or standby applications.
The high watt-hour per dollar value is made possible by the materials used in a sealed lead-acid battery: they are readily available and low in cost.
this batteries may be discharged over a temperature range of -20°C to +50°C (-4°F to + 122°F) and charged at temperatures ranging from 0°C to +40°C (32°F to +104°F). The high impact resistant battery case is made either of non-conductive ABS plastic or styrene.Large capacity batteries frequently have polypropylene cases. All of these case materials impart great resistance to shock, vibration, chemicals and heat. A low self-discharge ratepermits storage of fully charged batteries for up to a year at room temperature before charging is required. Lower storage temperatures enhance shelf life characteristics even further.
Under normal operating conditions, four or five years of dependable service life can be expected in stand-by applications, or between 200-1000 charge/discharge cycles depending on average depth of discharge.Terminal: T1CAPACITYDIMENSIONS (mm)Nominal voltage
V20 hour rate F.V.
1.75V/cell
A.H.LWTTHWeightkg
121.3984550560.60
Additional information
Weight | 0.476 kg |
---|
You must be logged in to post a review.
WS2812 6pin RGB Smart LED SMD 5050
Carbon Resistor 0.25W 470R 470 Ohm
Spring Test Probe Pogo Pin P50-J1 Dia 0.68mm Length 16mm
SIM800L GPRS GSM ultra small module
AC Load Bank LDRM 3Ph 250KW
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.