2mV / div ~ 5mV / div ± 4% (the average of the sampling or sampling) 10mV / div ~ 5V / div ± 3% (sample or average sampling)
Trigger System
Trigger sensitivity (edge-triggered)
DC: from DC to 10MHz for a grid, from 10MHz to 1.5 100M grid; from 100MHz to 300MHz for two grid; EXT: from DC to 40MHz for 200mV; EXT / 5: from DC to 40MHz for 1V; AC: attenuation 10Hz The following signals; High Frequency Rejection:> 80kHz signal will be attenuated; LF Reject: <will attenuate signals 150kHZ; Noise Reduction: Reduce the trigger sensitivity
Trigger level range
Inside: from the screen center ± 8div external (EXT): ± 1.2V; External (EXT / 5): ± 6V
Trigger Level Accuracy (typical)
Internal: ± (0.3div × V / div) (from the center of the screen within ± 4div range) EXT: ± (6% setpoint + 40mV) EXT / 5: ± (6% setpoint + 200mV)
Reading resolution: 6; accuracy (typical): ± 30ppm (including all frequency reference errors and ± 1 calculation error); Frequency Range: AC coupling, from the smallest to the rated bandwidth of 10Hz
Measure
Cursor measurements
Manual mode: the voltage difference between cursors △ V; time difference △ T between cursors; △ T reciprocal, in Hz (1 / △ T); tracking mode: the voltage value and the time value of waveform points
Automatic measurement (32 kinds)
Frequency, period, average, peak to peak, RMS, maximum, minimum, rise time, fall time, Positive Width, Negative Width, the rising phase, falling phase, positive duty cycle, negative duty cycle, the bottom value, top value, median, amplitude, overshoot, pre-shoot, Cycle Mean, Cycle mean square value, falling overshoot, the rising preshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF
General Characteristics
Display Type
7 “TFT 16-bit true color LCD screen
Display Resolution
800 * 480 resolution
Contrast
16-speed adjustable and the screen displays a progress bar adjustment
Interface
USB master and slave interfaces
Supply Voltage
100-120VACRMS (± 10%), 45Hz to 440Hz, CAT II; 120-240VACRMS (± 10%), 45Hz to 66Hz, CATⅡ
Reviews
There are no reviews yet.