Description
The micro-sized, Arduino enabled, usb development board – cheap enough to leave in any project!
The Specs:
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source – 5v or 7-35v (automatic selection – 12v or under recommended)
- On-board 500ma 5V Regulator
- Built-in USB
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)
- 8k Flash Memory (about 6k after bootloader)
- I2C and SPI (vis USI)
- PWM on 3 pins (more possible with Software PWM)
- ADC on 4 pins
- Power LED and Test/Status LED (on Pin1)
Just how small is it? Well it’s about the size of a quarter. While the small size made hand soldering prototypes difficult, we find that it is the perfect size to stick in even our smallest projects, but not too small to comfortably handle. Since it uses standard 0.1 in spaced headers it is easy to hookup to anything.
USB On-Board: With the on board USB connector it is also easy to program by either directly plugging it into the computer or, if it is installed in a project, with a super cheap and common USB extension cable. In addition, it is small enough to be left plugged in your computer, use it to run a computer controlled RGB status LED, read a directly attached sensor, or fool your friends by programming it to be a USB keyboard and turn their caps lock on and off randomly, the possibilities are endless!
The Digispark is and will always be open source hardware – it is licensed under CC-BY-SA 3.0 and the schematics, firmware, and anything else you might need to hack, change, or recreate the Digispark are fully released and public!
Getting started guide: https://digistu.mp/digispark
Note: Some laptop USB ports are too far recessed for the Digispark connector and may require the use of a USB extension cable or hub.
Additional information
Weight | 0.055 kg |
---|
You must be logged in to post a review.
AC Thyrestor Load Regulator Dimmer Controller 4000W OutPut 0-220v AC
4pin to 6pin 2m Long cable for Nema17 motor
DIODE 1N4007 SMD M7
Transparent Acrylic Shell Box For Arduino Mega2560 R3 Board
PCB For ESP8266 Dual Relay Module
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.