TP8485E 3.3-5V Low Power Half-Duplex RS-485 Transceiver with 300 bps to 250 kbps
Description
Description
The TP8485E are IEC61000 ESD protected, 3V~5.5V powered transceivers that meet the RS-485 and RS-422 standards for balanced communication. Driver outputs and receiver inputs are protected against ±18kV ESD strikes without latch-up. Transmitters in this family deliver exceptional differential output voltages (2.5V min/5Vcc), into the RS-485 required 54Ω load, for better noise immunity, or to allow up to eight 120Ω terminations in “star” topologies. These devices have very low bus currents so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without using repeaters. Receiver (Rx) inputs feature a “Full Fail-Safe” design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or on a terminated but undriven bus. Rx outputs feature high drive levels – typically 25mA @ VOL = 1V (to ease the design of optocoupled isolated interfaces). The TP8485E is available in an SOIC-8 and MSOP-8 package, and is characterized from –40°C to 125°C.
Features
Exceeds Requirements of EIA-485 Standard
Hot Plug Circuitry – Tx and Rx Outputs Remain Three-State During Power-up/Power-down
Data Rate: 300 bps to 250 kbps
Full Fail-safe (Open, Short, Terminated) Receivers
Up to 256 Nodes on a Bus (1/8 unit load)
Wide Supply Voltage 3V to 5.5V
SOIC-8 Package for Backward Compatibility
Bus-Pin Protection: – ±18 kV HBM protection – ±13 kV IEC61000-4-2 Contact Discharge – +4 kV IEC61000-4-4 Fast Transient Burst
Additional information
Weight | 0.002 kg |
---|
You must be logged in to post a review.
0805 SMD LED Package Kit 100pcs
7mm Detachable magnetic anti-interference EMI Noise filter ring
BALL BEARING 625ZZ 5X16X5MM
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.