Ultra-compact Power Module HLK-PM01 for Smart Home AC-DC isolation switching power supply 220v To 5v 3W AC DC Module
Description
Ultra-Small Power Module HLK-PM01 for Smart Home AC-DC isolation switching power supply 220v To 5v 3W
Features of Ultra Small Power Module HLK-PM01 :
1. meet the UL , the CE requirements ,
2. Thin and small
2 . Full voltage input (90~264Vac)
3 . Low ripple, low noise
4 . Output overload short circuit protection
5 . High efficiency and high-power density
6 . Product design meets EMC and safety testing requirements
7 . Low power consumption, green and environmental protection, no-load loss <0.1W
8 . 100% load aging and testing
2. Environmental conditions of Ultra Small Power Module HLK-PM01
Item program name
|
Technical indicators
|
Single -bit
|
Operating temperature
|
-20-+60
|
°C
|
Storage temperature
|
– 40-+80
|
°C
|
Relative humidity
|
5-95
|
%
|
Heat dissipation method
|
Natural cooling
|
|
Atmospheric pressure
|
80-106
|
K pa
|
Altitude
|
≤ 2000
|
m
|
vibration
|
Vibration coefficient 10~500Hz, 2G10min./1cycle, 60min.each along X, Y, Z axes
|
3. Electrical characteristics of Ultra Small Power Module HLK-PM01
1. Input characteristics (tested at room temperature) of Ultra Small Power Module HLK-PM01
Item program name
|
skills requirement
|
Single -bit
|
Rated input voltage
|
100-240
|
V A c
|
Input voltage range
|
90-264
|
V A c
|
Large input current
|
≤0.2
|
A
|
Input surge current
|
; ≤10
|
A
|
Large input voltage
|
≤270
|
V A c
|
Input slow start
|
≤50
|
mS
|
Input low voltageefficiency
|
V in= 110 V A c , output full load ≥ 69
|
%
|
Input high voltageefficiency
|
V in= 220 V A c , output full load ≥70
|
%
|
Long-term reliability
|
MTBF≥100,000
|
h
|
No-load rated output voltage
|
+5±0.1
|
Additional information
Weight | 0.2 kg |
---|
You must be logged in to post a review.
jumper Pin Header Male Shorting Block 2.54mm
3D Printer KAPTON Tape 10mm
Battery UPS CSB 12V 7.2A (UPS 1272)
Fluke TL175 TwistGuard Test Leads
MD8002A 3 watt Audio Power Amplifier SMD SOP8
Relay SPDT 5PIN 24V SMI
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.