W5500 SPI Ethernet Controller TCP/IP Interface Module

SKU: D6-5-9
In Stock
EGP 385.000 exc. vat
In Stock

Other people want this. 6 people have this in their carts right now.


W5500 SPI Ethernet Controller TCP/IP Interface Module

The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that provides easier Internet connection to embedded systems. W5500 enables users to have the Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10/100 Ethernet MAC and PHY embedded.

The SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module based on Ethernet WIZNET new type of chip W5500, module integrates the whole hardware TCP/IP protocol stack, no need code implements the TCP/IP protocol stack. The module Supports transmission rate of 10/100MBPS.  Also, support sleep mode and wake on LAN, Within the integrated 32K TX/RX cache.

SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module has 8 independent ports run at the same time, Module supports 3.3V or 5V power supply, convenient for the user to use in the SCM system different, module and MCU system communication mode is SPI protocol.  Support SPI clock frequencies up to 80M, provide STM32 and 51 SCM client, server, three modes of UDP routines.


  1. Home Network Devices: Set-Top Boxes, PVRs, Digital Media Adapters
  2. Serial-to-Ethernet: Access Controls, LED displays, Wireless AP relays, etc.
  3. Parallel-to-Ethernet: POS / Mini Printers, Copiers
  4. USB-to-Ethernet: Storage Devices, Network Printers
  5. GPIO-to-Ethernet: Home Network Sensors
  6. Security Systems: DVRs, Network Cameras, Kiosks
  7. Factory and Building Automation
  8. Medical Monitoring Equipment
  9. Embedded Servers


  1. Supports both 3.3V & 5V.
  2. Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
  3. 10BaseT/100BaseTX Ethernet PHY embedded.
  4. Supports automatic response (full duplex/half duplex mode).
  5. Supports 8 independent sockets simultaneously.
  6. Internal 32Kbytes Memory for Tx/Rx Buffers.
  7. Power off mode: support.
  8. Network wake: support.
  9. SPI interface (SPI MODE 0, 3), convenient connection with MCU.

W5500 Features:

  •     Supports following Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
  •     Supports 8 independent sockets simultaneously
  •     Supports Power down mode
  •     Supports Wake on LAN over UDP
  •     Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)
  •     Internal 32Kbytes Memory for Tx/Rx Buffers
  •     10BaseT/100BaseTX Ethernet PHY embedded
  •     Support Auto Negotiation (Full and half duplex, 10 and 100-based)
  •     Not support IP Fragmentation
  •     3.3V operation with 5V I/O signal tolerance
  •     LED outputs (Full/Half duplex, Link, Speed, Active)
  •     48 Pin LQFP Lead-Free Package (7x7mm, 0.5mm pitch)


Additional information

Weight0.032 kg





There are no reviews yet.

Be the first to review “W5500 SPI Ethernet Controller TCP/IP Interface Module”

Refund Policy for UGE Electronics “Https://uge-one.com “


1. Returns and Refunds

Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.


2. Eligibility for Refund

To be eligible for a refund, please make sure that:

– The item was purchased in the last 14 days.

– The item is in the original packaging.

– The item isn’t used or damaged.


3. How to Initiate a Refund

To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.


4. Refund Processing Time

Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.

If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.


5. Shipping Costs

Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.


6. Exchanges

If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.


7. Damaged or Defective Items

If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.


8. Contact Information

If you have any questions about our Refund Policy, please contact us at [[email protected]].


Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.

Product Enquiry

Please Login to make enquiry about this product
W5500 SPI Ethernet Controller TCP/IP Interface Module EGP 385.000 exc. vat
In Stock