No products in the cart.
Description
ZXY6020S NC DC-DC Power Supply Module Programmable 60V 20A 1200W Constant Voltage Current
Introduction:
ZXY-6020S is single output programmable switch power supply. Its specification is 60V, 20A, 1200W. It designed by DC-DC modularization ,has a small size and a high output power. Besides, it has equipped with TTL serial interface, provide a serial communication protocol, allows user to secondary development, we can according to your design and test requirements to provide versatile solutions.
Main special features and advantages:
Based on BUCK structure of switch power supply technology, the work frequency reach up to 150 KHz
DC input voltage range : 13V~ 62V, which is suitable for multiple kinds of pre-stage input power supplies
Operation key and multi-function encoder combine for the operation, it is convenient and easy to use
High accuracy and high resolution: 10 mV / 10 mA
Low ripple and low noise
Indicator light:constant current( CC) ,constant voltage (CV) and output state (ON)
LCD1602 display
Adjust voltage and current by adjustment knob and keys
Support measuring and displaying output voltage, output current, output power, output electric quantity (AH) and working time
Intelligent temperature detection, can connect an external DC12V fan,and control its speed in level 5
The minimum voltage difference 2V can still work steadily
With output turn off function key, flexible turn on or off output
10 groups of parameter settings of M0-M9, which can be conveniently called out at any moment
Prompt for operation or alarm function of onboard buzzer
Convenient and simple three-phase charge intelligent control function of storage battery
With TTL serial communication, and improved communication protocol so as to be convenient for centralized control
Parameters:
Input voltage: 13V-62V
Output voltage: 0-60V
Output current: 0-20A
Output power: 0-1200W
Output voltage setting resolution: 10mV
Output current setting resolution: 10mA
Power effect: CV <0.5% + 10mV, CC <1% + 5mA
Load effect: CV <0.5% + 10mV, CC <1% + 5mA
Output ripple: <50mVpp (input 54V, output 12V, current 8A)
100Hz fluctuations transfer ratio: <10000
Typical efficiency: Input 54 V, 36 V, output current 8A
The display precision of Voltage, Current: 10mV, 10mA
Display error of voltage: ±1% +50mV
Display error of current: ±2% +20mA
Response time: < 50ms
Memory operation: 10 groups of parameter storage of M0-M9
Protection type: OTP, OVP, OCP, OPP, OAH, OFT
Heat-dissipating method: Heat dissipater and fan
Operating ambient temperature: 0 to +40°C
Storage ambient temperature: -20 to +70°C
Use ambient: For indoor use, maximum humidity is 80%
Dimension:
Power module(with heat sink): 130 x 85 x 75mm
Control module: 130 x 85 x 43mm
More details: Please click here to download.
Note:
This power module can broaden the input voltage range up to about 100V, but the output is still 0-60V.
ZXY6020S type, the output is TTL serial signal, when connected to a computer, you need to convert.
Significant improvements in this product is that all control displays are reserved for the interface, which means that users do not weld out any components on the board, you can add lines to external connect switches, buttons, LCD, CC-CV-OUT indicator, coding, etc.,
Additional information
| Weight | 0.01 kg |
|---|
Brand
Chinese
Chinese
Chinese
You must be logged in to post a review.
5V 2A DC UPS Uninterruptible Power Supply Module
EGP 85.000 exc. vat Read more
M3 x 15mm Male-female Brass Hex PCB Standoff Spacer
EGP 2.250 exc. vat Read more
2N5401
EGP 2.500 exc. vat Add to cart
RJ45 8pin Connector Breakout Module
EGP 31.800 exc. vat Read more
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Product Enquiry
Related products
DC-DC Boost Converter Step-up module 1.5V to 12V
EGP 35.000 exc. vat Read more
MT3608 SOT23 DC-DC Step Up Boost regulator IC
EGP 13.000 exc. vat Add to cart
Reviews
There are no reviews yet.