5V 2A DC UPS Uninterruptible Power Supply Module

SKU: 5V-2A-DC-UPS -Mod
Out of stock
EGP 85.000 exc. vat
Out of stock


5V 2A DC UPS Uninterruptible Power Supply Module

DC UPS 5V 2A high-power uninterruptible power supply module, version V5.0, the output is connected to the load or charger in parallel version, the output terminal is in bidirectional mode, the battery is charged when the power is on, and the output is reversed when the power is turned off. The battery is automatically charged and discharged. With 4 level power indicator, output overload protection, short circuit protection, chip overheat protection, battery over discharge protection, suitable for all kinds of 5V routers, switches, camera attendance machine power supply, and another EPS version is used for lighting power supply or device charging!    (The color samples of the power display LED lamp are shipped randomly, and red or green can be specified during proofing customization, blue is not supported)

Warning: When connecting a non-power battery, the capacity should not be lower than 3000mA, and the lower limit of the capacity can be reduced when it is not fully loaded, otherwise it will easily cause fire problems when the battery is overloaded!

The connection line between the battery and the motherboard should not be less than 20AWG or 0.5 square. The length of a single wire is recommended to be controlled within 10cm. The power output lead should not be too long. It is recommended to be within 20CM!

the battery lead must be thick enough, otherwise it can not output enough current, the battery is trickle charging when the battery is lower than 3V, the current is very weak, the input power of the external power supply is insufficient or the internal resistance of the battery is too high There may be abnormal charging problems! In addition, impure input power or large line loss will also affect the switching system, etc. Please check and solve the fault yourself. As long as it is used according to the regulations, there is no problem with the power, there is no virtual standard,

Regarding the switching problem: if the purity of the external power supply is not enough or the load has interference, it will affect the switching speed. It can be solved by connecting a solid capacitor or a tantalum capacitor in parallel at the output end. It is not recommended that parallel electrolytic capacitors will affect performance! Capacitor voltage can be 10-16V, capacity 47-470uf, if you must use electrolytic capacitors, it is recommended that the capacity not exceed 100UF, otherwise it will affect performance!

Regarding the problem of heat generation: UPS products cannot be used at full load, because the battery voltage will drop, so the power should not exceed 60% when configuring the parameters, otherwise the motherboard will be hot and the battery power will be consumed quickly! , The motherboard heats about 30-40 degrees at light load, about 40-50 degrees at half load, about 60-70 degrees at full load, and about 80-90 degrees at full load if the battery is low!

Additional information

Weight0.01 kg





There are no reviews yet.

Be the first to review “5V 2A DC UPS Uninterruptible Power Supply Module”

Refund Policy for UGE Electronics “Https://uge-one.com “


1. Returns and Refunds

Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.


2. Eligibility for Refund

To be eligible for a refund, please make sure that:

– The item was purchased in the last 14 days.

– The item is in the original packaging.

– The item isn’t used or damaged.


3. How to Initiate a Refund

To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.


4. Refund Processing Time

Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.

If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.


5. Shipping Costs

Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.


6. Exchanges

If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.


7. Damaged or Defective Items

If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.


8. Contact Information

If you have any questions about our Refund Policy, please contact us at [[email protected]].


Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.

Product Enquiry

Please Login to make enquiry about this product
5V 2A DC UPS Uninterruptible Power Supply Module
5V 2A DC UPS Uninterruptible Power Supply Module EGP 85.000 exc. vat
Out of stock