No products in the cart.
Auto Bed Leveling Touch Sensor for 3D Printer
Out of stock
EGP 499.000 exc. vat
Out of stock
Brand:Chinese
Description
Auto Bed Leveling Sensor with Auto Leveling Feature 3D Touch for 3D Printer
Features:
1. 3Dtouch can be easily applied because of its small size and simple structure. Gathering information and firmware settings will be an easy task, because the 3dtouch works as usual, the automatic bed leveling sensor.
2. Intelligence: self test: push the nail operation two times when the power is on.
3. High precision: the standard deviation of repeatability 3dtouch is about 0.005mm, and the accuracy is high.
4. The stationary state, while the pin pulled out or retracted, no current flow solenoid valve, the standby current of the equipment is lower than the average current of 15mA, and in the work state, pin suddenly moves about 100ms the equipment back in less than 300mA. Low power consumption even further reduces Joule heating to prevent heat problems.
5. Bed width selection:
3dtouch does not use any light, do not close (the inductance / capacitance sensor).
3dtouch control through the Holzer effect, providing high accuracy. So the bed material is free to choose.
6. Optimized structure: larger volume.
7. 3DTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface.
8. 3DTouch features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods , metals and so on.
Warm Tips:
Some 3D printer motherboard has insufficient of 5V power supply, it may need external 5V power supply, which is difficult to probe launch, or the action logic circuit protection master restart.
If encountered, it is generally recommended to use the DC-DC buck module to take power from the main power supply.
1. +5V and GND do not reverse long time reversed, there may be burned (wiring: 3d-touch wiring 3Pin: Black (- GND), Red (+ 5V) blue (control signal) 2PIN: Black (-, GND) yellow (Zmin)
2. When installing, please keep away from strong magnetic, motor and fan, and other magnetic components.
3 Accidental impact of probe aluminum rods may damage or affect detection accuracy.
4. Adjusting or reassembling the probe’s tightening screws requires threading glue.
5. Avoid shell deformation when installing probes.
6. Pulling aluminum rods will damage or affect the detection accuracy.
Note :
Please allow 1-3 cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
1 x 3D-touch Probe
2 x M2.5 Screws
2 x M2.5 Nut
1 x 2Pin Female To Female Dupont Line
1 x 3Pin Female To Female Dupont Line
1 x Connection Cable
2 x M2.5 Screws
2 x M2.5 Nut
1 x 2Pin Female To Female Dupont Line
1 x 3Pin Female To Female Dupont Line
1 x Connection Cable
Brand
Chinese
Chinese
Chinese
You must be logged in to post a review.
3D Printer Tower Frame Laser Cut 6mm PlyWood DIY KIT
EGP 375.000 exc. vat Read more
Raspberry Pi 3 Model B plus – Raspberry Pi3 B Plus
EGP 2,800.000 exc. vat Read more
Slow Blow Fuse T10A Miniature PCB mounted TE5 392 Series
EGP 8.000 exc. vat Add to cart
LM358N SMD SOP-8
EGP 6.000 exc. vat Add to cart
LCD DISPLAY 16X4 GREEN
EGP 120.000 exc. vat Read more
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Product Enquiry
Related products
3D Printer Egypt Control Board Mikromake MAKEBAORD 1.4 RAMPS Compatible
EGP 950.000 exc. vat Read more
CR-10 3D Printer Laser Engraver Module Upgrade
EGP 3,500.000 exc. vat Read more
Arduino UNO CNC Shield V3
EGP 125.000 exc. vat Read more
Reviews
There are no reviews yet.