No products in the cart.
CH32V203F8P6 TSSOP20 144MHZ RISC-V industrial-grade microcontroller
In Stock
EGP 75.000 exc. vat
In Stock
Brand:Chinese
Description
CH32V203F8P6 TSSOP20 144MHZ RISC-V industrial-grade microcontroller Arduino IDE Support
Description
The CH32V203 is an industrial-grade microcontroller (MCU) designed for general-purpose use, with low power consumption and enhanced performance. It is based on a 32-bit RISC-V core, supports the RV32IMAC instruction set, and can operate at clock frequencies of up to 144MHz. The MCU’s power consumption is highly efficient, reaching as low as 45uA per MHz. Additionally, the CH32V203 integrates a USB interface with two channels, enabling both USB Host and USB Device functionalities. It also provides a CAN interface (2.0B active) with one channel, up to two OPA channels, four UARTs, two I²Cs, a 12-bit ADC, a 10-channel TouchKey, and various other peripheral resources.
Features
- 32-bit RISC-V4B processor
- Up to 144MHz system clock frequency
- Single-cycle multiplication and hardware division
- Up to 20KB SRAM, 64KB Flash
- Supply voltage: 2.5V/3.3V, GPIO unit is supplied independently
- Multiple low-power modes: sleep/stop/standby
- Down to 44.65uA/MHz in Run mode
- Down to 17.90uA/MHz in Sleep mode
- Power-on/power-down reset (POR/PDR), programmable voltage detector (PVD)
- 1 x 18-channel general DMA controllers
- 2 OPA amplifiers
- 10-channel 12-bit ADC, 10-channel TouchKey
- 4 timers
- One USB2.0 full-speed host/device interface and/or one USB2.0 full-speed device interface
- Up to 4 UARTs
- Up to ne CAN interface (2.0B active)
- Up to 2 I²C interfaces, up to 2 SPI interfaces
- Up to 37 I/O ports, can be mapped to 16 external interrupts
- Up to one CRC calculation unit, 96-bit unique ID
- Serial 2-wire debug interface
Software Development Tools
MounRiver Studio IDE
The Eclipse-based closed-source MounRiver Studio IDE is the official development environment provided by WCH. It supports Windows, Linux, and Mac. MounRiver Studio can be downloaded for free.
Open-Source GCC Toolchain
You can download a complete toolchain (GCC and OpenOCD) for Linux and Mac from the MounRiver Studio website. However, on Linux you can also install a GCC-based toolchain by running the following command:
sudo apt install build-essential libnewlib-dev gcc-riscv64-unknown-elf
Arduino IDE and PlatformIO Support
There are projects around to make the CH32V203 compatible with the Arduino IDE (arduino_core_ch32) and PlatformIO (platform-ch32v).
References, Links and Notes
- EasyEDA Design Files
- MounRiver Studio
- CH32V203 with Arduino IDE
- CH32V203 with PlatformIO
- CH32V203 on openwch
- CH32V203 datasheets
- WCH-Link user manual
Additional information
| need to Customize this product? |
|---|
Brand
Chinese
Chinese
Chinese
You must be logged in to post a review.
Power Sonic PG-12V200 FR Sealed Lead Acid Battery 12V 210 Amp Hour Long Life
EGP 11,150.000 exc. vat Read more
3D Printer Extrusion Brass Nozzle MK10 M7 0.2mm for 1.75 Filament
EGP 30.000 exc. vat Add to cart
IRFB20N50K
EGP 20.000 exc. vat Read more
3D Printer NTC 10K Sensor with 50 Cm Cable
EGP 20.000 exc. vat Read more
Smd Chip Capacitor size 0402 10nF
EGP 0.550 exc. vat Add to cart
3D Printer Closed Timing Belt 930-2GT-6mm
EGP 45.000 exc. vat Read more
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Product Enquiry
Related products
CH549G USB microcontroller with 60KB ROM/ 256B IRAM/ 2Kbytes XRAM and DMA
EGP 100.000 exc. vat Add to cart
I2C to GPIO IO Expander Controller CH423S SOP28
EGP 60.000 exc. vat Add to cart
PCF8574TS I2C Controller SMD TSSOP16pin
EGP 80.000 exc. vat Add to cart
Reviews
There are no reviews yet.