Subtotal: EGP 40.000
ESP32 CAM Development Board includes the Camera WIFI Bluetooth
Description
Introduction
ESP32-CAM is a low-cost ESP32-based development board with onboard camera, small in size. It is an ideal solution for IoT application, prototypes constructions and DIY projects.
The board integrates WIFI, traditional Bluetooth and low power BLE, with 2 high-performance 32-bit LX6 CPUs. It adopts 7-stage pipeline architecture, on-chip sensor, Hall sensor, temperature sensor and so on, and its main frequency adjustment ranges from 80MHz to 240MHz.
Fully compliant with WIFI 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices
ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
Notes:
1.Please be sure that the power supply for the module should be at least 5V 2A, otherwise maybe there would be water ripple appearing on the image.
2.ESP32 GPIO32 pin is used to control the power of the camera, so when the camera is in working, pull GPIO32 pin low.
3.Since IO pin is connected to camera XCLK, it should be left floating in using, and do not connect it to high/low level.
4.The product has been equipped with default firmware before leaving the factory, and we do not provide additional one’s for you to download. So, please be cautious when you choose to burn other firmware’s.
FEATURES
Up to 160MHz clock speed Summary computing power up to 600 DMIPS
Built-in 520 KB SRAM, external 4MPSRAM
Supports UART/SPI/I2C/PWM/ADC/DAC
Support OV2640 and OV7670 cameras, Built-in Flash lamp.
Support image Wi-Fi upload
Support TF card
Supports multiple sleep modes.
Embedded Free-RTOS
Supports STA/AP/STA+AP operation mode
Support Smart Config technology
Support for serial port local and remote firmware upgrades (FOTA)
SPECIFICATION
SPI Flash: default 32Mbit
RAM: built-in 520 KB + external 4MPSRAM
Dimension: 27*40.5*4.5(±0.2)mm/1.06*1.59*0.18”
Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
Wi-Fi: 802.11b/g/n/e/i
Support Interface: UART, SPI, I2C, PWM
Support TF card: maximum support 4G
IO port: 9
Serial Port Baud-rate: Default 115200 bps
Image Output Format: JPEG (OV2640 support only), BMP, GRAYSCALE
Spectrum Range: 2412 ~2484MHz
Antenna: onboard PCB antenna, gain 2dBi
Transmit Power: 802.11b: 17±2 dBm (@11Mbps);
802.11g: 14±2 dBm (@54Mbps);
802.11n: 13±2 dBm (@MCS7)
Receiving Sensitivity: CCK, 1 Mbps: -90dBm;
CCK, 11 Mbps: -85dBm;
6 Mbps (1/2 BPSK): -88dBm;
54 Mbps (3/4 64-QAM): -70dBm;
MCS7 (65 Mbps, 72.2 Mbps): -67dBm
Power consumption: Turn off the flash: 180mA@5V
Turn on the flash and adjust the brightness to the maximum: 310mA@5V
Deep-sleep: the lowest power consumption can reach 6mA@5V
Modem-sleep: up to 20mA@5V
Light-sleep: up to 6.7mA@5V
Security: WPA/WPA2/WPA2-Enterprise/WPS
Power supply range: 5V
Operating temperature: -20 °C ~ 85 °C
Storage environment: -40 °C ~ 90 °C, < 90%RH
Weight: 10g
You must be logged in to post a review.
M3 x 8mm Nickel-plated SMD PCB Standoff Spacer
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.