No products in the cart.
KEW 3128 HIGH VOLTAGE 12000v INSULATION TESTER
Out of stock
EGP 324,500.000 exc. vat
Out of stock
Brand:Chinese
Description
• Microprocessor controlled high voltage insulation resistance tester with Diagnostic functions.
• Suitable for analyzing the insulation characteristics of cables, transformers, motors, generators, high-pressure switches, insulators, wiring installations, etc.
• 6 ranges: 500V, 1000V, 2500V, 5000V, 10000V, 12000V
Fine adjustment of voltage setting at each range is also possible
• Graphic representation of the insulation resistance and leakage current versus time on large display with bar graph and backlight.
• Can be operated from built-in rechargeable battery or from AC line.
• Automatic discharge after test with monitoring of the discharge voltage.
• Internal memory can store about 43,000 data (max).
• Robust design for field use with IP64 rating (with lid closed).
Insulation resistance (*): Accuracy is not guaranteed with setting of 250V or less
|
Rated voltage |
500V |
1000V |
2500V |
5000V |
10000V |
12000V |
|
Max measurement value |
500GΩ |
1TΩ |
2.5TΩ |
5TΩ |
35TΩ |
|
|
Accuracy |
400k～50GΩ ±5%rdg±3dgt |
800k～100GΩ 5%rdg±3dgt |
2M～250GΩ ±5%rdg±3dgt |
4M～500GΩ ±5%rdg±3dgt |
8M～1TΩ ±5%rdg±3dgt |
|
|
50.1G～500GΩ |
101G～1TΩ |
251G～2.5TΩ |
501G～5TΩ |
1.01T～10TΩ |
||
|
10.1T – 35TΩ |
||||||
|
Short circuit current |
Max 5.0mA |
|||||
|
Load resistor to output rated voltage |
0.5MΩ or more |
1MΩ or more |
2.5MΩ or more |
5MΩ or more |
20MΩ or more |
24MΩ or more |
Output voltage
|
Rated voltage |
500V |
1000V |
2500V |
5000V |
10000V |
12000V |
|
Monitor accuracy |
±10%±20V |
±10%±20V |
±10%±20V |
±10%±20V |
±10%±20V |
±10%±20V |
|
Output accuracy |
0 – +20% |
0 – +10% |
0 – +10% |
0 – +10% |
-5 – +5% |
-5 – +5% |
|
Selectable range |
50 – 600V |
610 – 1200V (in steps of 10V) |
1225 – 3000V (in steps of 25V) |
3050 – 6000V (in steps of 50V) |
6100 – |
10100 – 12000V (in steps of 100V) |
Voltage measurement
|
Measuring range |
DCV：±30 ～ ±600V、ACV：30 ～ 600V （50/60Hz） |
|
Accuracy |
±2%rdg±3dgt |
Current measurement
|
Measuring range |
5.00nA – 2.40mA (Depending on the insulation resistance) |
Capacitance measurement
|
Measuring range |
5.0nF ～ 50.0μF |
5.0nF – 1.0µF (display range: 5.0nF – 50.0µF) (10000V/12000V) |
|
Accuracy |
±5%rdg±5dgt |
|
General
|
Applicable standards |
IEC 61010-1 CAT IV 600V Pollution degree 2, |
|
Operating temperature & humidity range |
-10ºC – Relative humidity 85% or less |
|
Storage temperature & humidity range |
-20ºC – 60ºC / Relative humidity 75% or less (no condensation) |
|
Power source |
Rechargeable Lead storage battery (12V)* |
|
Dimensions |
330 (L) × 410 (W) × 180 (D) mm *Instrument and Hard case |
|
Weight |
9kg approx. (including battery) *Instrument and Hard case |
|
Included Accessories |
7170 (Main cord), 7224A (Earth cord), 7225A (Guard cord), 7226A (Line probe), |
|
Optional Accessories |
7254 (Longer Line probe with alligator clip) |
Brand
Chinese
Chinese
Chinese
You must be logged in to post a review.
Clamp Meter UNI-T UT202A (UT202A)
EGP 410.000 exc. vat Read more
0805 SMD Chip Resistor 27K
EGP 0.750 exc. vat Add to cart
SMA Female PCB Mount Right Angle
EGP 65.000 exc. vat Add to cart
Coils 0.5 Watt 47uH
EGP 2.000 exc. vat Add to cart
AM2301 Temperature Humidity Sensor
EGP 320.000 exc. vat Add to cart
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Product Enquiry
Related products
FPC Flat Cable 10 pin 1.0mm Pitch 200mm Long Reverse Direction
EGP 20.000 exc. vat Add to cart
Megger MIT-1025
EGP 42,500.000 exc. vat Read more
Fluke 1555
EGP 100,000.000 exc. vat Read more
INSULATION TESTER UNI-T UT511
EGP 2,300.000 exc. vat Read more
Reviews
There are no reviews yet.