Subtotal: EGP 200.000
Oscilloscope Digital 4 Channel DSO7104B
Description
Model | DSO7302B DSO7304B | DSO7202B DSO7204B | DSO7102B DSO7104B | DSO7082B DSO7064B |
Analog Bandwidth | 300MHz | 200MHz | 100MHz | 80MHz / 60MHz |
Real-time sampling | 2GSa / s | |||
Record Length | 64K | |||
Timebase range (s / div) | 2ns / div-40s / div | 4ns / div-40s / div | ||
Delay between channels | 500ps | |||
Vertical Systems | ||||
AD converter | 8bit resolution, two-channel simultaneous acquisition | |||
Vertical Sensitivity | 2mV / div ~ 5V / div (at the BNC input) | |||
Vertical displacement range | ± 50V (5V / div), ± 40V (2V / div ~ 500mV / div), ± 2V (200mV / div ~ 50mV / div) ± 400mV (20mV / div ~ 2mV / div) | |||
Rise time (in the BNC) | ≤1.2ns | ≤1.8ns | ≤3.5ns | ≤4.4ns / ≤5.8ns |
DC gain accuracy | 2mV / div ~ 5mV / div ± 4% (the average of the sampling or sampling) 10mV / div ~ 5V / div ± 3% (sample or average sampling) | |||
Trigger System | ||||
Trigger sensitivity (edge-triggered) | DC: from DC to 10MHz for a grid, from 10MHz to 1.5 100M grid; from 100MHz to 300MHz for two grid; EXT: from DC to 40MHz for 200mV; EXT / 5: from DC to 40MHz for 1V; AC: attenuation 10Hz The following signals; High Frequency Rejection:> 80kHz signal will be attenuated; LF Reject: <will attenuate signals 150kHZ; Noise Reduction: Reduce the trigger sensitivity | |||
Trigger level range | Inside: from the screen center ± 8div external (EXT): ± 1.2V; External (EXT / 5): ± 6V | |||
Trigger Level Accuracy (typical) | Internal: ± (0.3div × V / div) (from the center of the screen within ± 4div range) EXT: ± (6% setpoint + 40mV) EXT / 5: ± (6% setpoint + 200mV) | |||
Holdoff Range | 100ns-10s | |||
Trigger Type | Video, edge, pulse width, slope, overtime, alternate trigger | |||
Trigger Frequency Counter | Reading resolution: 6; accuracy (typical): ± 30ppm (including all frequency reference errors and ± 1 calculation error); Frequency Range: AC coupling, from the smallest to the rated bandwidth of 10Hz | |||
Measure | ||||
Cursor measurements | Manual mode: the voltage difference between cursors △ V; time difference △ T between cursors; △ T reciprocal, in Hz (1 / △ T); tracking mode: the voltage value and the time value of waveform points | |||
Automatic measurement (32 kinds) | Frequency, period, average, peak to peak, RMS, maximum, minimum, rise time, fall time, Positive Width, Negative Width, the rising phase, falling phase, positive duty cycle, negative duty cycle, the bottom value, top value, median, amplitude, overshoot, pre-shoot, Cycle Mean, Cycle mean square value, falling overshoot, the rising preshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF | |||
General Characteristics | ||||
Display Type | 7 “TFT 16-bit true color LCD screen | |||
Display Resolution | 800 * 480 resolution | |||
Contrast | 16-speed adjustable and the screen displays a progress bar adjustment | |||
Interface | USB master and slave interfaces | |||
Supply Voltage | 100-120VACRMS (± 10%), 45Hz to 440Hz, CAT II; 120-240VACRMS (± 10%), 45Hz to 66Hz, CATⅡ | |||
Power |
Weight | 1.214 kg |
---|
You must be logged in to post a review.
JST SM Connector Terminals pins Pack of 10pcs
Resistor 1W Carbon Film 5% Tolerance 33K Ohm
Zener Diode 0.5W 39V
I-Shape 8x10mm Power Coil Inductor 150uH
DC miniature ultra-small size water submersible Water Flow pump 3-9V
TB67H450FNG Motor control driver H bridge 3.5A
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Reviews
There are no reviews yet.