RXC6 RF receiver 433 MHZ – 4 Channel

Description

RXC6 wireless module, is a high sensitivity 433Mhz receiver module. Integrated 4 bit decoding and very good signal to noise ratio offered by the Superheterodyne Receiver

Quick Specs

• Frequency: 433.92Mhz
• Operating voltage: 3 to 5.5V DC
• Quiescent Current: 4mA
• Receiver sensitivity:-105DB
• Size: 30 * 14 * 7mm
• External antenna: 32CM single core wire, wound into a spiral

RXC6 Board Layout

Pin Functions

• 1 ANT – External Antenna – Spiral 32cm
• 2 GND – Ground
• 3 External LED
• 4 External Switch for programming mode
• 5 VT: Will flash when signal receive
• 6 Data D0
• 7 Data D1
• 8 Data D2
• 9 Data D3

Jumper Settings – Directly Translated from Chinese

• T2 & T1 Open – Momentary Default
• T2 Closed, T1 Open – Latching Mode
• T2 Open, T1 Closed – Toggle Mode

Learn button

Press and hold the key for 2 seconds , learn indicator light at this time that has entered the state of learning; learning key release, press any remote control – a key indicator flashes four times indicates success in learning, and exit learning mode.

To Reset, Press and hold learning key indicator lit, hold about 8 seconds after the light is off, all the code has been successfully cleared.

Shipping List

• 1 x RF receiver
• 1 x RF Wire Antenna