No products in the cart.
4A 30V Adjustable Step Up Step Down Power Supply Module Boost Buck Converter LCD Display Voltage Regulator
Out of stock
EGP 225.000 exc. vat
Out of stock
Brand:Chinese
Description
1.Description:
ZK-SJVA-4X is a DC adjustable constant voltage constant current step down/up power supply module with LCD display. HD display input voltage and output voltage, current, power and display status. Adjustable stable output voltage and current. Set output current to meet the demand. It can be used as ordinary buck power supply module, charger and LED constant current driver.
2.Features:
1>.High voltage resistant terminal.
2>.With high quality acrylic shell.
3>.Support complete disability output.
4>.Support anti-reverse protection.
5>.Support short circuit protection.
6>.Support undervoltage protection.
7>.Support anti-backflow Protection.
8>.Support Automatic buck/boost voltage.
9>.Support enable output.
10>.LCD screen HD display.
11>.Support charging function.
12>.Support select output.
13>.Support display input voltage.
14>.Support display output voltage, current, power.
15>.Support working status indicator.
16>.Multiple parameters are displayed simultaneous.
17>.High current, low heat.
3.Parameters:
1>.Product Name:ZK-SJVA-4X 4A Step Down/Up Power Supply Module
2>.Working Voltage:DC 5.5V-30V
3>.Output Voltage:DC 0.5V-30V
4>.Output Current:4A (4A need heat sink; 3A is stable for long time)
5>.Output Power:50W(50W need heat sink; 35W is for 3A)
6>.Voltage Display Range:0~30V
7>.Voltage Display Precision:+/-0.5V
8>.Voltage Display Resolution:0.05V
9>.Current Display Range:0~4A
10>.Current Display Precision:+/-0.3A
11>.Voltage Display Resolution:0.005A
12>.Conversion efficiency:About 94%
13>.Working current:30mA
14>.Soft Starter:Yes(Failure at high power load)
15>.Anti-reverse Protection:Yes
16>.Anti-backflow Protection:Yes
17>.Short Protection:Yes
18>.Work frequency:180KHz
19>.Working Temperature range:-20℃~85℃
20>.Working Humidity range:0%-95%RH
21>.Size:66*48*21mm
4.Button/Potentiometer/LED introduction:
1>.Long press means need keep press for more than 3second.
2>.ON/OFF:Short Press to select whether output.Long press is used to restore default settings.
3>.IN/OUT:Short Press to switch display input voltage or output voltage.Long press is used to switch display output current or output power.
4>.CV Potentiometer:Adjust output voltage.Increase the output voltage when rotating clockwise.
5>.CC Potentiometer:Adjust output current.Increase the output current when rotating clockwise.
6>.ON LED:Green LED.Output indicator.It will turn ON when there is a output at output terminal.
7>.CC LED:Red LED.Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current indicator turns ON.
5.Using Steps:
1>.As a ordinary step down power module:
1.1>.Connect right input voltage at input terminal;
1.2>.Adjust CV constant voltage potentiometer to set output voltage according to require.
1.3>.Rotate CC potentiometer counterclockwise more than 10 turns at first.
1.4>.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)
1.5>.Rotate CC constant current potentiometer clockwise to set output current according to require overcurrent protection value.
1.6>.Test and using(E.g:Module’s maximum output current is 2A if display 2A on multimeter.Red LED indicator will turn on if output reach to 2A.Otherwise LED is OFF.)
1.7>.The output voltage will decrease due to the current sampling resistor at the output. The higher the current, the more the voltage is reduced.
2>.As a charger:
2.1>.Tops:Power module can not be used as charger module if it does not support constant current function.The voltage difference between the battery with insufficient voltage and the charger is very large.Causes excessive charging current even damage the battery.So it need keep charging in constant current mode to reaching a certain level.Then automatically switch back to constant voltage charging.
2.2>.Make sure floating charge voltage and charge current for battery.If the lithium battery’s parameter is 3.7V/2200mAh, then the float charge voltage is 4.2V, and the maximum charging current is 1C, which is 2200mA.
2.3>.Connect right input voltage at input terminal.(Note:Please don’t connect load during set parameter).
2.4>.Test output voltage by multimeter and adjust CC potentiometer to make sure output voltage reach to require floating charge voltage.(If charge a 3.7V lithium battery, adjust the output voltage to 4.2V)
2.5>.Rotate CC potentiometer counterclockwise more than 10 turns at first.
2.6>.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)
2.7>.Rotate CC constant current potentiometer clockwise to set output current according to require charge current value.
2.8>.Connect battery at output terminal and start to charging.
3>.As a high power LED constant current driver:
3.1>.Make sure LED working current and maximum working voltage.
3.2>.Connect right input voltage at input terminal.(Note:Please don’t connect load during set parameter).
3.3>.Test output voltage by multimeter at output terminal and adjust CV potentiometer to set output voltage to LED’s maximum working voltage.
3.4>.Rotate CC potentiometer counterclockwise more than 10 turns.
3.5>.Test Output short circuit current by multimeter at 10A or 20A(Connect two Test Probes to output terminal on module)
3.6>.Rotate CC constant current potentiometer clockwise to set output current according to require LED working current.
3.7>.Connect LED and test.
6.Note:
1>.Input undervoltage protection voltage is 4.7V.Module need re-power if input less than 4.7V.
2>.Please rotate the CV potentiometer counterclockwise more than 20 turns if there is no output voltage.
3>.It is a DC power module,So it can not connect to AC power.
4>.Module need re-power after short protection.
5>.Please connect input before connect battery when use as charge and make sure output voltage is higher than battery voltage.
6>.’IN-’ and ‘OUT-’ can not be connect together,otherwise module can not support constant current output.
7>.Please make sure input power is more than load power.
8>.Please step down output power if module is hot.
9>.Please read use manual and description before use.
7.Application:
1>.Ordinary power supply;
2>.Battery charger;
3>.LED drive power;
4>.Instrument voltage display;
5>.Test meter;
6>.Circuit test;
7>.Power conversion.
8.Package:
1>.1pc ZK-SJVA-4X 4A Step Down/Up Power Supply Module;
2>.1pc Heat Sink;
3>.4pcs White isolation seat.
Warning: Considering respect the copyright of the partners, it is not allowed to put the below pictures or videos without approval in any ot
her webshop. We are not responsible for any complaint if you used them from our website arbitrarily.
1. New! Tested by ICStation’s Outstanding Partner zxDTSxz:
Additional information
| Weight | 0.025 kg |
|---|
Brand
Chinese
Chinese
Chinese
You must be logged in to post a review.
Electrolytic Capacitors 2200uF 35V
EGP 7.000 exc. vat Read more
JST Connector Male Polarized XH2.54 8P
EGP 2.500 exc. vat Read more
DIY DC Current Sensor Breakout Module INA219
EGP 85.000 exc. vat Add to cart
Voltage Regulator Adjustable LM317T
EGP 10.000 exc. vat Add to cart
Refund Policy for UGE Electronics “Https://uge-one.com “
1. Returns and Refunds
Thank you for shopping at UGE Electronics “Https://uge-one.com “. If you are not entirely satisfied with your purchase, we’re here to help.
2. Eligibility for Refund
To be eligible for a refund, please make sure that:
– The item was purchased in the last 14 days.
– The item is in the original packaging.
– The item isn’t used or damaged.
3. How to Initiate a Refund
To initiate a refund, please contact our customer support at [[email protected]] or [01066552125]. Provide your order number and details about the product you would like to return.
4. Refund Processing Time
Once we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment). You will receive the credit within a certain amount of days, depending on your card issuer’s policies.
5. Shipping Costs
Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
6. Exchanges
If you wish to exchange an item, please contact our customer support. You will be responsible for the return shipping costs, and we will cover the shipping costs of the replacement item.
7. Damaged or Defective Items
If you received a damaged or defective product, please contact us immediately for assistance. We will work with you to resolve the issue promptly.
8. Contact Information
If you have any questions about our Refund Policy, please contact us at [[email protected]].
Important Note: This Return & Refund Policy is applied only for Orders invoiced VIA UGE Electronics, and regarding any Orders has been invoiced VIA any Other Vendor you can check the Return & Refund Policy of this Vendor VIA the Vendor Stroe Page, and it’s not our responsibility for any issue between you and the Vendor.
Product Enquiry
Related products
W5100 ETHERNET MODULE
EGP 195.000 exc. vat Read more
L9110 PWM Dual DC Motor Driver Hbridge
EGP 65.000 exc. vat Read more
WT588D-U Voice Record Module
EGP 125.000 exc. vat Read more
Reviews
There are no reviews yet.